Open topic with navigation

TCL

NAME - ::<namespace>:: pppox_config

Synopsis | Arguments | Return values | Examples | Sample input | Sample output | Notes

The following table lists the platforms that support the pppox_config command.

Command IxOS/IxNetwork-FT IxNetwork IxNetwork-NGPF

::<namespace>:: pppox_config

API

Scriptgen

API

Scriptgen

API

Scriptgen

Yes

No

Yes

Yes

Yes

Yes

NAME - ::<namespace>:: pppox_config

DESCRIPTION

IxNetwork, IxOS/IxNetwork-FT

This procedure configures PPPoA, PPPoEoA, PPPoE sessions for the specified test port. This command allows the user to configure a specified number of PPPoX sessions on the test port. Each port can have upto 32000 sessions.

IxNetwork-NGPF

This procedure configures PPPoA, PPPoEoA, PPPoE sessions for the specified test port. This command allows the user to configure a specified number of PPPoX sessions on the test port. Each port can have upto 32000 sessions.

SYNOPSIS - ::<namespace>::pppox_config

List arguments in the alphabetical order or in the reverse alphabetical order.

Arguments

IxOS/IxNetwork-FT

IxNetwork

IxNetwork-NGPF

IxLoad

[-port_role

CHOICES access network

CHOICES access network

CHOICES access network

-

]

[-handle

-

ANY

ANY

-

]

[-protocol_name

-

-

ALPHA

-

]

[-unlimited_redial_attempts

-

-

CHOICES 0 1

-

]

[-enable_mru_negotiation

-

CHOICES 0 1

CHOICES 0 1

-

]

[-desired_mru_rate

-

NUMERIC

NUMERIC

-

]

[-max_payload

-

NUMERIC

NUMERIC

-

]

[-enable_max_payload

-

CHOICES 0 1

CHOICES 0 1

-

]

[-client_ipv6_ncp_configuration

-

-

CHOICES learned request

-

]

[-client_ipv4_ncp_configuration

-

-

CHOICES learned request

-

]

[-server_ipv6_ncp_configuration

-

-

CHOICES clientmay serveronly

-

]

[-server_ipv4_ncp_configuration

-

-

CHOICES clientmay serveronly

-

]

[-lcp_enable_accm

-

-

CHOICES 0 1

-

]

[-lcp_accm

-

-

ANY

-

]

[-num_sessions

RANGE 1 - 32000

RANGE 1 - 32000

RANGE 1 - 32000

-

]

[-ac_select_mode

CHOICES first_responding ac_mac ac_name service_name

CHOICES first_responding ac_mac ac_name service_name

CHOICES first_responding ac_mac ac_name

-

]

[-ac_match_name

-

-

ALPHA

-

]

[-ac_match_mac

-

-

ALPHA

-

]

[-auth_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[-config_req_timeout

RANGE 1 - 120

RANGE 1 - 120

RANGE 1 - 120

-

]

[-echo_req

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[-echo_rsp

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[-ip_cp

CHOICES ipv4_cp ipv6_cp dual_stack

CHOICES ipv4_cp ipv6_cp dual_stack

CHOICES ipv4_cp ipv6_cp dual_stack

-

]

[-ipcp_req_timeout

RANGE 1 - 120

RANGE 1 - 120

RANGE 1 - 120

-

]

[-max_auth_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[-max_padi_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[-max_padr_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[-max_terminate_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 0 - 65535

-

]

[-padi_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[-padr_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[-password

ANY

ANY

ALPHA

-

]

[-chap_secret

-

-

ALPHA

-

]

[-username

ANY

ANY

ALPHA

-

]

[-chap_name

-

-

ALPHA

-

]

[-vlan_id

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4095

-

]

[-vlan_id_count

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 1 - 4094

-

]

[-vlan_id_step

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4094

-

]

[-vlan_user_priority

RANGE 0 - 7

RANGE 0 - 7

RANGE 0 - 7

-

]

[-vlan_user_priority_step

-

-

RANGE 1 - 7

-

]

[-vlan_user_priority_outer

RANGE 0 - 7

RANGE 0 - 7

RANGE 0 - 7

-

]

[-mode

CHOICES add remove modify

CHOICES add remove modify

CHOICES add remove modify

-

]

[-auth_mode

CHOICES none pap chap pap_or_chap

CHOICES none pap chap pap_or_chap

CHOICES none pap chap pap_or_chap

-

]

[-echo_req_interval

-

RANGE 1 - 3600

RANGE 1 - 3600

-

]

[-mac_addr

MAC

MAC

MAC

-

]

[-mac_addr_step

-

MAC

MAC

-

]

[-max_configure_req

-

RANGE 1 - 255

RANGE 1 - 255

-

]

[-max_ipcp_req

-

RANGE 1 - 255

RANGE 1 - 255

-

]

[-ac_name

ANY

ANY

ALPHA

-

]

[-actual_rate_downstream

-

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[-actual_rate_upstream

-

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[-agent_circuit_id

ANY

ANY

ALPHA

-

]

[-agent_remote_id

ANY

ANY

ALPHA

-

]

[-data_link

-

CHOICES atm_aal5 ethernet

CHOICES atm_aal5 ethernet

-

]

[-enable_domain_group_map

-

-

CHOICES 0 1

-

]

[-domain_group_map

ANY

ANY

ALPHA

-

]

[-enable_client_signal_iwf

-

CHOICES 0 1

CHOICES 0 1

-

]

[-enable_client_signal_loop_char

-

CHOICES 0 1

CHOICES 0 1

-

]

[-enable_client_signal_loop_encap

-

CHOICES 0 1

CHOICES 0 1

-

]

[-enable_client_signal_loop_id

-

CHOICES 0 1

CHOICES 0 1

-

]

[-enable_server_signal_iwf

-

CHOICES 0 1

CHOICES 0 1

-

]

[-enable_server_signal_loop_char

-

CHOICES 0 1

CHOICES 0 1

-

]

[-enable_server_signal_loop_encap

-

CHOICES 0 1

CHOICES 0 1

-

]

[-enable_server_signal_loop_id

-

CHOICES 0 1

CHOICES 0 1

-

]

[-intermediate_agent

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[-intermediate_agent_encap1

-

CHOICES na untagged_eth single_tagged_eth

CHOICES na untagged_eth single_tagged_eth

-

]

[-intermediate_agent_encap2

-

CHOICES na pppoa_llc pppoa_null ipoa_llc ipoa_null eth_aal5_llc_fcs eth_aal5_llc_no_fcs eth_aal5_null_fcs eth_aal5_null_no_fcs

CHOICES na pppoa_llc pppoa_null ipoa_llc ipoa_null eth_aal5_llc_fcs eth_aal5_llc_no_fcs eth_aal5_null_fcs eth_aal5_null_no_fcs

-

]

[-ipv6_global_address_mode

CHOICES icmpv6 dhcpv6_pd

CHOICES icmpv6 dhcpv6_pd

CHOICES icmpv6 dhcpv6_pd

-

]

[-ipv6_pool_prefix_len

NUMERIC

NUMERIC

NUMERIC

-

]

[-ipv6_pool_prefix

ANY

ANY

IPV6

-

]

[-ipv6_pool_addr_prefix_len

NUMERIC

NUMERIC

NUMERIC

-

]

[-ppp_local_iid

ANY

ANY

IPV6

-

]

[-ppp_local_ip

IPV4

IPV4

IPV4

-

]

[-ppp_local_ip_step

IPV4

IPV4

IPV4

-

]

[-ppp_local_iid_step

-

-

NUMERIC

-

]

[-ppp_peer_iid

ANY

ANY

IPV6

-

]

[-ppp_peer_iid_step

-

-

NUMERIC

-

]

[-ppp_peer_ip

IPV4

IPV4

IPV4

-

]

[-ppp_peer_ip_step

IPV4

IPV4

IPV4

-

]

[-redial

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[-redial_max

-

RANGE 1 - 255

RANGE 1 - 255

-

]

[-redial_timeout

-

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[-service_name

ANY

ANY

ALPHA

-

]

[-service_type

-

-

CHOICES any name

-

]

[-send_dns_options

-

-

CHOICES 0 1

-

]

[-dns_server_list

-

-

ANY

-

]

[-client_dns_options

-

-

CHOICES request_primary_and_secondary request_primary_only accept_addresses_from_server accept_only_primary_address_from_server disable_extension

-

]

[-client_dns_primary_address

-

-

IPV4

-

]

[-client_dns_secondary_address

-

-

IPV4

-

]

[-client_netmask_options

-

-

CHOICES disable_extension request request_specific_netmask accept_netmask_from_server

-

]

[-client_netmask

-

-

IPV4

-

]

[-client_wins_options

-

-

CHOICES disable_extension request_primaryonly_wins request_primaryandsecondary_wins accept_addresses_from_server accept_only_primary_address_from_server

-

]

[-client_wins_primary_address

-

-

IPV4

-

]

[-client_wins_secondary_address

-

-

IPV4

-

]

[-server_dns_options

-

-

CHOICES accept_requested_addresses accept_only_requested_primary_address supply_primary_and_secondary supply_primary_only disable_extension

-

]

[-server_dns_primary_address

-

-

IPV4

-

]

[-server_dns_secondary_address

-

-

IPV4

-

]

[-server_netmask_options

-

-

CHOICES disable_extension request accept_requested_netmask supply_netmask

-

]

[-server_netmask

-

-

IPV4

-

]

[-server_wins_options

-

-

CHOICES disable_extension accept_requested_addresses accept_only_requested_primary_address supply_primary_and_secondary supply_primary_only

-

]

[-server_wins_primary_address

-

-

IPV4

-

]

[-server_wins_secondary_address

-

-

IPV4

-

]

[-ra_timeout

-

-

NUMERIC

-

]

[-create_interfaces

-

-

CHOICES 0 1

-

]

[-attempt_rate

-

RANGE 1 - 1000

RANGE 1 - 1000

-

]

[-attempt_max_outstanding

-

-

RANGE 1 - 1000

-

]

[-attempt_interval

-

-

NUMERIC

-

]

[-attempt_enabled

-

-

CHOICES 0 1

-

]

[-attempt_scale_mode

-

-

CHOICES port device_group

-

]

[-disconnect_rate

RANGE 1 - 1000

RANGE 1 - 1000

RANGE 1 - 1000

-

]

[-disconnect_max_outstanding

-

-

RANGE 1 - 1000

-

]

[-disconnect_interval

-

-

NUMERIC

-

]

[-disconnect_enabled

-

-

CHOICES 0 1

-

]

[-disconnect_scale_mode

-

-

CHOICES port device_group

-

]

[-enable_session_lifetime

-

-

CHOICES 0 1

-

]

[-min_lifetime

-

-

NUMERIC

-

]

[-max_lifetime

-

-

NUMERIC

-

]

[-enable_session_lifetime_restart

-

-

CHOICES 0 1

-

]

[-max_session_lifetime_restarts

-

-

NUMERIC

-

]

[-unlimited_session_lifetime_restarts

-

-

CHOICES 0 1

-

]

[-accept_any_auth_value

-

-

CHOICES 0 1

-

]

[-port_handle

-

interface

REGEXP ^[0-9]+/[0-9]+/[0-9]+$

-

]

[-protocol

-

CHOICES pppoa pppoeoa pppoe

CHOICES pppoe pppoeoa pppoa

-

]

[-vci

RANGE 1 - 65535

RANGE 1 - 65535

-

-

]

[-vci_step

RANGE 1 - 65534

RANGE 1 - 65534

-

-

]

[-vci_count

-

RANGE 1 - 65504

-

-

]

[-addr_count_per_vci

-

RANGE 1 - 65535

-

-

]

[-vpi

RANGE 0 - 255

RANGE 0 - 255

-

-

]

[-vpi_step

RANGE 1 - 255

RANGE 1 - 255

-

-

]

[-vpi_count

RANGE 1 - 256

RANGE 1 - 256

-

-

]

[-addr_count_per_vpi

-

RANGE 1 - 65535

-

-

]

[-pvc_incr_mode

CHOICES vpi vci both

CHOICES vpi vci both

-

-

]

[-encap

-

CHOICES ethernet_ii ethernet_ii_vlan ethernet_ii_qinq vc_mux vc_mux_routed vc_mux_nofcs llcsnap llcsnap_routed llcsnap_nofcs

CHOICES ethernet_ii ethernet_ii_vlan ethernet_ii_qinq vc_mux vc_mux_routed vc_mux_nofcs llcsnap llcsnap_routed llcsnap_nofcs

-

]

[-address_per_vlan

RANGE 1 - 1000000000

RANGE 1 - 1000000000

RANGE 1 - 1000000000

-

]

[-address_per_svlan

RANGE 1 - 1000000000

RANGE 1 - 1000000000

RANGE 1 - 1000000000

-

]

[-qinq_incr_mode

CHOICES inner outer both

CHOICES inner outer both

CHOICES inner outer both

-

]

[-vlan_id_outer

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4095

-

]

[-vlan_id_outer_count

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 1 - 4094

-

]

[-vlan_id_outer_step

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4094

-

]

[-vlan_user_priority_count

-

-

-

-

]

[-password_wildcard

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[-username_wildcard

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[-wildcard_pound_start

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[-wildcard_pound_end

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[-wildcard_question_start

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[-wildcard_question_end

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[-ac_select_list

KEYLIST

KEYLIST

ANY

-

]

[-enable_throttling

-

-

-

-

]

[-enable_setup_throttling

-

-

-

-

]

[-enable_multicast

-

-

-

-

]

[-local_magic

RANGE 0 - 1

RANGE 0 - 1

-

-

]

[-term_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

-

-

]

[-lcp_max_failure

-

-

NUMERIC

-

]

[-max_outstanding

-

RANGE 1 - 1000

RANGE 1 - 1000

-

]

[-dhcpv6_hosts_enable

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[-dhcp6_global_echo_ia_info

-

CHOICES 0 1

CHOICES 0 1

-

]

[-dhcp6_global_max_outstanding_releases

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[-dhcp6_global_max_outstanding_requests

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[-dhcp6_global_reb_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[-dhcp6_global_reb_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[-dhcp6_global_rel_max_rc

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[-dhcp6_global_rel_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[-dhcp6_global_ren_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[-dhcp6_global_ren_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[-dhcp6_global_req_max_rc

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[-dhcp6_global_req_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[-dhcp6_global_req_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[-dhcp6_global_setup_rate_initial

-

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[-dhcp6_global_setup_rate_increment

-

RANGE - 10000

-

-

]

[-dhcp6_global_setup_rate_max

-

RANGE 1 - 100000

-

-

]

[-dhcp6_global_sol_max_rc

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[-dhcp6_global_sol_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[-dhcp6_global_sol_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[-dhcp6_global_teardown_rate_initial

-

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[-dhcp6_global_teardown_rate_increment

-

RANGE - 10000

-

-

]

[-dhcp6_global_teardown_rate_max

-

RANGE 1 - 100000

-

-

]

[-dhcp6_global_wait_for_completion

-

CHOICES 0 1

-

-

]

[-dhcpv6pd_type

CHOICES client server

CHOICES client server

CHOICES client server

-

]

[-dhcp6_pd_client_range_duid_enterprise_id

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[-dhcp6_pd_client_range_duid_type

CHOICES duid_en duid_llt duid_ll

CHOICES duid_en duid_llt duid_ll

CHOICES duid_en duid_llt duid_ll

-

]

[-dhcp6_pd_client_range_duid_vendor_id

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[-dhcp6_pd_client_range_duid_vendor_id_increment

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[-dhcp6_pd_client_range_ia_id

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[-dhcp6_pd_client_range_ia_id_increment

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[-dhcp6_pd_client_range_ia_t1

RANGE 0 - 2147483647

RANGE 0 - 2147483647

RANGE 0 - 2147483647

-

]

[-dhcp6_pd_client_range_ia_t2

RANGE 0 - 2147483647

RANGE 0 - 2147483647

RANGE 0 - 2147483647

-

]

[-dhcp6_pd_client_range_ia_type

CHOICES iapd

CHOICES iapd

CHOICES iapd iana iata iana_iapd

-

]

[-dhcp6_pd_client_range_param_request_list

NUMERIC

NUMERIC

-

-

]

[-dhcp6_pd_client_range_renew_timer

RANGE 0 - 1000000000

RANGE 0 - 1000000000

RANGE 0 - 1000000000

-

]

[-dhcp6_pd_client_range_use_vendor_class_id

CHOICES 0 1

CHOICES 0 1

-

-

]

[-dhcp6_pd_client_range_vendor_class_id

ANY

ANY

-

-

]

[-dhcp6_pd_server_range_dns_domain_search_list

ANY

ANY

ANY

-

]

[-dhcp6_pd_server_range_first_dns_server

IP

IP

IP

-

]

[-dhcp6_pd_server_range_second_dns_server

IP

IP

IP

-

]

[-dhcp6_pd_server_range_subnet_prefix

NUMERIC

NUMERIC

NUMERIC

-

]

[-dhcp6_pd_server_range_start_pool_address

IP

IP

IP

-

]

[-dhcp6_pgdata_max_outstanding_requests

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[-dhcp6_pgdata_override_global_setup_rate

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[-dhcp6_pgdata_setup_rate_initial

RANGE 1 - 100000

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[-dhcp6_pgdata_setup_rate_increment

RANGE 0 - 100000

RANGE 0 - 100000

-

-

]

[-dhcp6_pgdata_setup_rate_max

RANGE 1 - 100000

RANGE 1 - 100000

-

-

]

[-dhcp6_pgdata_max_outstanding_releases

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[-dhcp6_pgdata_override_global_teardown_rate

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[-dhcp6_pgdata_teardown_rate_initial

RANGE 1 - 100000

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[-dhcp6_pgdata_teardown_rate_increment

RANGE 0 - 100000

RANGE 0 - 100000

-

-

]

[-dhcp6_pgdata_teardown_rate_max

RANGE 1 - 100000

RANGE 1 - 100000

-

-

]

[-hosts_range_ip_outer_prefix

NUMERIC

NUMERIC

-

-

]

[-hosts_range_ip_prefix_addr

IP

IP

-

-

]

[-hosts_range_count

RANGE 1 - 1000000

RANGE 1 - 1000000

-

-

]

[-hosts_range_eui_increment

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

-

-

]

[-hosts_range_first_eui

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

-

-

]

[-hosts_range_ip_prefix

RANGE 64 - 128

RANGE 64 - 128

-

-

]

[-hosts_range_subnet_count

RANGE 1 - 32

RANGE 1 - 32

-

-

]

[-lease_time_max

RANGE 300 - 30000000

RANGE 300 - 30000000

-

-

]

[-lease_time

RANGE 300 - 30000000

RANGE 300 - 30000000

RANGE 300 - 30000000

-

]

[-padi_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[-pado_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[-padr_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[-pads_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[-re_connect_on_link_up

-

-

-

-

]

[-group_ip_count

-

-

-

-

]

[-group_ip_step

-

-

-

-

]

[-start_group_ip

-

-

-

-

]

[-igmp_version

-

-

-

-

]

[-is_last_subport

-

-

-

-

]

[-join_leaves_per_second

-

-

-

-

]

[-l4_src_port

-

-

-

-

]

[-l4_dst_port

-

-

-

-

]

[-l4_flow_number

-

-

-

-

]

[-l4_flow_type

-

-

-

-

]

[-l4_flow_variant

-

-

-

-

]

[-mc_enable_general_query

-

-

-

-

]

[-mc_enable_group_specific_query

-

-

-

-

]

[-mc_enable_immediate_response

-

-

-

-

]

[-mc_enable_packing

-

-

-

-

]

[-mc_enable_router_alert

-

-

-

-

]

[-mc_enable_suppress_reports

-

-

-

-

]

[-mc_enable_unsolicited

-

-

-

-

]

[-mc_group_id

-

-

-

-

]

[-mc_report_frequency

-

-

-

-

]

[-ppp_local_mode

-

-

-

-

]

[-ppp_peer_mode

-

-

-

-

]

[-enable_delete_config

-

-

-

-

]

[-flap_repeat_count

-

-

-

-

]

[-flap_rate

-

-

-

-

]

[-switch_duration

-

-

-

-

]

[-watch_duration

-

-

-

-

]

[-hold_time

-

-

-

-

]

[-cool_off_time

-

-

-

-

]

[-dut_assigned_src_addr

-

-

-

-

]

[-include_id

-

-

-

-

]

[-sessions_per_vc

-

-

-

-

]

[-enable_host_uniq

-

-

ANY

-

]

[-host_uniq

-

-

ANY

-

]

[-multiplier

-

-

NUMERIC

-

]

ARGUMENTS

[M] indicates if the argument is mandatory on the supported platform.

-port_role

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The role of the port in the test: access or network.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The role of the port in the test: access or network.

Valid options are:

access

is PPPoX client

network

is PPPoX server

DEFAULT

 None

-handle

Supported platforms Details

IxNetwork

DESCRIPTION

PPPoX handle of a configuration to be modified or removed.Dependencies: only available when IxNetwork is used for the PPPoX configuration.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

PPPoX handle of a configuration to be modified or removed. Dependencies: only available when IxNetwork is used for the PPPoX configuration. When -handle is provided with the /globals value the arguments that configure global protocol setting accept both multivalue handles and simple values. When -handle is provided with a a protocol stack handle or a protocol session handle, the arguments that configure global settings will only accept simple values. In this situation, these arguments will configure only the settings of the parent device group or the ports associated with the parent topology.

DEFAULT

 None

-protocol_name

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

-unlimited_redial_attempts

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

If checked, PPPoE unlimited redial attempts is enabled

DEFAULT

 None

-enable_mru_negotiation

Supported platforms Details

IxNetwork

DESCRIPTION

Enables the MRU Negotiation.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enable MRU Negotiation

DEFAULT

 None

-desired_mru_rate

Supported platforms Details

IxNetwork

DESCRIPTION

Max Transmit Unit for PPP.

DEFAULT

1492

IxNetwork-NGPF

DESCRIPTION

Max Transmit Unit for PPP

DEFAULT

 None

-max_payload

Supported platforms Details

IxNetwork

DESCRIPTION

Max Payload. Valid only when enable_max_payload is enabled.

DEFAULT

1492

IxNetwork-NGPF

DESCRIPTION

Max Payload. Valid only when enable_max_payload is enabled.

DEFAULT

 None

-enable_max_payload

Supported platforms Details

IxNetwork

DESCRIPTION

Enables PPP Max Payload tag.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables PPP Max Payload tag

DEFAULT

 None

-client_ipv6_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv6_cp or dual_stack

Valid options are:

learned

request

DEFAULT

learned

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-client_ipv4_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv4_cp or dual_stack

Valid options are:

learned

request

DEFAULT

learned

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-server_ipv6_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv6_cp or dual_stack

Valid options are:

clientmay

serveronly

DEFAULT

clientmay

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-server_ipv4_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv4_cp or dual_stack

Valid options are:

clientmay

serveronly

DEFAULT

clientmay

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-lcp_enable_accm

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable Async-Control-Character-Map

DEFAULT

 None

-lcp_accm

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Async-Control-Character-Map. Valid only when lcp_enable_accm is enabled.

DEFAULT

 None

-num_sessions

Supported platforms Details

IxNetwork [M] , IxOS/IxNetwork-FT [M]

DESCRIPTION

PPP sessions to configure, applies to PPPoEoE and PPPoEoA only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The number of PPP sessions to configure. For PPP servers this will configure the number of sessions supprted by each server. For PPP clients this will configure the number of client sessions that are available.

DEFAULT

 None

-ac_select_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

There are various ways AC can be selected based on the PADO first_responding - (DEFAULT)ac_mac - Specify the AC MAC Address and percentage pair using -ac_select_list.ac_name - Specify the AC Name and percentage pair using -ac_select_list option.service_name

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

There are various ways AC can be selected based on the PADO received from AC.

Valid options are:

first_responding

(DEFAULT)

ac_mac

Specify the AC MAC Address and percentage pair using -ac_select_list.

ac_name

Specify the AC Name and percentage pair using -ac_select_list option.

DEFAULT

first_responding

-ac_match_name

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

-ac_match_mac

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

-auth_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an authentication Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an authentication Request.

DEFAULT

5

-config_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a Configure Request or Terminate Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a Configure Request or Terminate Request.

DEFAULT

5

-echo_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When set to 1, enables Echo Requests, when set to 0, disables Echo Requests.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When set to 1, enables Echo Requests, when set to 0, disables Echo Requests.

DEFAULT

0

-echo_rsp

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

0 - Disable sending of the echo Responses.1 - (DEFAULT) Enable Echo Replies.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This can be used to do negative testing. Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration). Valid choices are: 0 - Disable sending of the echo Responses. 1 - (DEFAULT) Enable Echo Replies.

DEFAULT

1

-ip_cp

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Not defined

Valid options are:

ipv4_cp

IPv4 Control Protocol. When dhcpv6_hosts_enable is 1 a PPPoX IPv4

ipv6_cp

IPv6 Control Protocol. When dhcpv6_hosts_enable is 1 a DHCPv6 behind

dual_stack

Valid only when dhcpv6_hosts_enable is 1. A dual stack DHCPv6 behind

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

ipv4_cp

IPv4 Control Protocol. When dhcpv6_hosts_enable is 1 a PPPoX IPv4 range will be created that can coexist with other ranges from the same port created with dhcpv6_hosts_enable 1. An error will be issued if dhcpv6_hosts_enable is 0 and other ranges created with dhcpv6_hosts_enable 1 exist on the same port.

ipv6_cp

IPv6 Control Protocol. When dhcpv6_hosts_enable is 1 a DHCPv6 behind PPP CPE range will be created. An error will be issued if dhcpv6_hosts_enable is 0 and other ranges created with dhcpv6_hosts_enable 1 exist on the same port.

dual_stack

Valid only when dhcpv6_hosts_enable is 1. A dual stack DHCPv6 behind PPP CPE range will be created. An error will be issued if other ranges created with dhcpv6_hosts_enable 0 exist on the same port.

DEFAULT

ipv4_cp

-ipcp_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an IPCP configure request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an IPCP configure request.

DEFAULT

5

-max_auth_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of Authentication Requests that can be sent without getting an authentication response from the DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of Authentication Requests that can be sent without getting an authentication response from the DUT.

DEFAULT

10

-max_padi_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of PADI Requests that can be sent without getting a PADO from the DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of PADI Requests that can be sent without getting a PADO from the DUT.

DEFAULT

10

-max_padr_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of PADR Requests that can be sent without getting a PADS from the DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of PADR Requests that can be sent without getting a PADS from the DUT.

DEFAULT

10

-max_terminate_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of Terminate Requests that can be sent without acknowledgement.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of Terminate Requests that can be sent without acknowledgement.

DEFAULT

10

-padi_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADI Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADI Request.

DEFAULT

5

-padr_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADR Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADR Request.

DEFAULT

5

-password

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Password, PAP and CHAP only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Password, PAP and CHAP only.

DEFAULT

 None

-chap_secret

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Secret when CHAP Authentication is being used

DEFAULT

 None

-username

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Username, PAP and CHAP only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Username, PAP and CHAP only.

DEFAULT

 None

-chap_name

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

User name when CHAP Authentication is being used

DEFAULT

 None

-vlan_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting VLAN ID, applies to PPPoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting VLAN ID, applies to PPPoE w/VLAN only.

DEFAULT

1

-vlan_id_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Number of VLAN IDs, applies to PPPoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Number of VLAN IDs, applies to PPPoE w/VLAN only.

DEFAULT

4094

-vlan_id_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to VLAN ID, PPPoEoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Step value applied to VLAN ID, PPPoEoE w/VLAN only.

DEFAULT

1

-vlan_user_priority

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

0

-vlan_user_priority_step

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

1

-vlan_user_priority_outer

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Outer VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Outer VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

0

-mode

Supported platforms Details

IxNetwork [M] , IxOS/IxNetwork-FT [M]

DESCRIPTION

Add - add a new PPPoX configurationModify - modify an existing PPPoX configuration (specified by -handle)Remove - Remove an existing PPPoX configuration (specified by -handle)

DEFAULT

 None

IxNetwork-NGPF [M]

DESCRIPTION

Dependencies: only available when IxNetwork is used for the PPPoX configuration.

Valid options are:

add

add a new PPPoX configuration

remove

Remove an existing PPPoX configuration (specified by -handle)

modify

modify an existing PPPoX configuration (specified by -handle)

DEFAULT

 None

-auth_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

none - (DEFAULT)papchappap_or_chap - Accept both PAP and CHAP offered by DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Authentication mode.

Valid options are:

none

(DEFAULT)

pap

chap

pap_or_chap

Accept both PAP and CHAP offered by DUT.

DEFAULT

 None

-echo_req_interval

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the time interval in seconds for sending LCP echo requests. Valid only if -echo_req is set to 1. When using IxNetwork this parameter can take values from the 1-3600 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the time interval in seconds for sending LCP echo requests. Valid only if -echo_req is set to 1. When using IxNetwork this parameter can take values from the 1-3600 range.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'echo_req' | value= '1' |

-mac_addr

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

DEFAULT

 None

-mac_addr_step

Supported platforms Details

IxNetwork

DESCRIPTION

Dependencies: -mode add or modify (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Dependencies: -mode add or modify (when IxNetwork is used for the PPPoX configuration).

DEFAULT

0000.0000.0001

-max_configure_req

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the maximum number of LCP Configure Requests that can be sent without acknowledgement. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of LCP Configure Requests that can be sent without acknowledgement. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

-max_ipcp_req

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the maximum number of IPCP configure requests that can be sent without getting an ack from the DUT. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of IPCP configure requests that can be sent without getting an ack from the DUT. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

-ac_name

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When the port is used as a server, this is the name sent in the PADO message.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When the port is used as a server, this is the name sent in the PADO message.

DEFAULT

 None

-actual_rate_downstream

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual downstream data rate (sub-option 0x81), in kbps. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual downstream data rate (sub-option 0x81), in kbps. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

-actual_rate_upstream

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual upstream data rate (sub-option 0x82), in kbps Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual upstream data rate (sub-option 0x82), in kbps Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

-agent_circuit_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters.The agent_circuit_id field is defined in strings of the form:%::i.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters.The agent_circuit_id field is defined in strings of the form: %::i.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

-agent_remote_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters. The agentRemoteId field is defined in strings of the form:%::i.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters. The agentRemoteId field is defined in strings of the form: %::i.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

-data_link

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the data-link protocol on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the data-link protocol on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

Valid options are:

atm_aal5

ethernet

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

-enable_domain_group_map

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

This parameter configures the Interworking function (IWF). For details refer to -enable_server_signal_iwf. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

-domain_group_map

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

List of domain group to LNS IP mapping. Each domain group can have thousands of domains. With the help of domain group it is very easy to map thousands of domains to one or more LNS IP addresses. Each domain group is defined as: { { domain_name } {lnsIP1 lnsIP2} }.Where domain_name is defined as:name : name to be used for the domain(s).wc {1|0} : enables wildcard substitution in the name field. wc_start : starting value for wildcard symbol for the name (%) substitutionwc_end : ending value for wildcard symbol for the name (%) substitutionlnsIP : LNS IP address list to be used for this domain.Example: You want to set up 20 domains, out of which cisco1.com to cisco10.com going to 192.1.1.1 & 192.1.1.2 and cisco11.com to cisco20.com going to 192.1.2.1. Also assume number of sessions per tunnel is 5. Your domain group list will look like:{ { {domain%.com 1 1 10} {192.1.1.1 192.1.1.2} }{ {domain%.com 1 11 20} {192.1.2.1} } }Tunnel Allocation will look like this:Sessions 1-5, tunnel1 dst 192.1.1.1;Sessions 5-10, tunnel2 dst 192.1.1.2;Sessions 11-15, tunnel3 dst 192.1.2.1;Sessions 16-20, tunnel4 dst 192.1.2.1.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

List of domain group to LNS IP mapping. Each domain group can have thousands of domains. With the help of domain group it is very easy to map thousands of domains to one or more LNS IP addresses. Each domain group is defined as: { { domain_name } {lnsIP1 lnsIP2} }. Where domain_name is defined as: {name wc wc_start wc_end } name : name to be used for the domain(s). wc {1|0} : enables wildcard substitution in the name field. wc_start : starting value for wildcard symbol for the name (%) substitution wc_end : ending value for wildcard symbol for the name (%) substitution lnsIP : LNS IP address list to be used for this domain. Example: You want to set up 20 domains, out of which cisco1.com to cisco10.com going to 192.1.1.1 & 192.1.1.2 and cisco11.com to cisco20.com going to 192.1.2.1. Also assume number of sessions per tunnel is 5. Your domain group list will look like: { { {cisco%.com 1 1 10} {192.1.1.1 192.1.1.2} } { {cisco%.com 1 11 20} {192.1.2.1} } } Tunnel Allocation will look like this: Sessions 1-5, tunnel1 dst 192.1.1.1; Sessions 5-10, tunnel2 dst 192.1.1.2; Sessions 11-15, tunnel3 dst 192.1.2.1; Sessions 16-20, tunnel4 dst 192.1.2.1.

DEFAULT

 None

-enable_client_signal_iwf

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures the Interworking function (IWF). For details refer to -enable_server_signal_iwf. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures the Interworking function (IWF). For details refer to -enable_server_signal_iwf. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

-enable_client_signal_loop_char

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

-enable_client_signal_loop_encap

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encapWhen this parameter is enabled, the discovery packets will include the 0x90 sub-option.Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap When this parameter is enabled, the discovery packets will include the 0x90 sub-option. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

-enable_client_signal_loop_id

Supported platforms Details

IxNetwork

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

-enable_server_signal_iwf

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures the Interworking function (IWF) - When ATM is supported on the DSL line (the U interface), the Access Node must provide protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures the Interworking function (IWF) - When ATM is supported on the DSL line (the U interface), the Access Node must provide protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

-enable_server_signal_loop_char

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics - the Access Node reports the access loop sync rate and interleave delay to the Broadband Network Gateway (BNG). This allows the BNG to enable policy decisions and advanced QoS enforcement, while potentially taking full advantage of the data rate of a given access loop. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics - the Access Node reports the access loop sync rate and interleave delay to the Broadband Network Gateway (BNG). This allows the BNG to enable policy decisions and advanced QoS enforcement, while potentially taking full advantage of the data rate of a given access loop. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

-enable_server_signal_loop_encap

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90): for access loop encapsulation the PPPoE intermediate agent inserts information in the PPPoE packets to signal to the BNG the data-link protocol and the encapsulation overhead on the Access Loop. For signaling of interworked sessions the Access Node must signal the BNG that a given PPPoE session is going to carry interworked PPPoA traffic. When this parameter is enabled, the discovery packets will include the 0x90 sub-option. Available only when IxNetwork is used for PPPoX configurations.Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90): for access loop encapsulation the PPPoE intermediate agent inserts information in the PPPoE packets to signal to the BNG the data-link protocol and the encapsulation overhead on the Access Loop. For signaling of interworked sessions the Access Node must signal the BNG that a given PPPoE session is going to carry interworked PPPoA traffic. When this parameter is enabled, the discovery packets will include the 0x90 sub-option. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

-enable_server_signal_loop_id

Supported platforms Details

IxNetwork

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

-intermediate_agent

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables the Intermediate Agent feature. This feature allows for the testing of DSLAM/BRAS devices that translate from PPPoA traffic to PPPoE traffic. When this option is true, the program inserts agent_circuit_id and agent_remote_id values into PPPoE tags for each PPPoE session.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables the Intermediate Agent feature. This feature allows for the testing of DSLAM/BRAS devices that translate from PPPoA traffic to PPPoE traffic. When this option is true, the program inserts agent_circuit_id and agent_remote_id values into PPPoE tags for each PPPoE session.

DEFAULT

 None

-intermediate_agent_encap1

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

Valid options are:

na

untagged_eth

single_tagged_eth

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

-intermediate_agent_encap2

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations.Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

Valid options are:

na

pppoa_llc

pppoa_null

ipoa_llc

ipoa_null

eth_aal5_llc_fcs

eth_aal5_llc_no_fcs

eth_aal5_null_fcs

eth_aal5_null_no_fcs

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

-ipv6_global_address_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Select the protocol used to set IPv6 global interfaces on PPP interfaces. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

Not defined

x

trigger

for each session, after completing

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Select the protocol used to set IPv6 global interfaces on PPP interfaces. This configuration applies at port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

icmpv6

(DEFAULT) IPv6 global address is fetched like before ' using ICMPV4 RA/RS messages.

dhcpv6_pd

PPP plugin will trigger - for each session, after completing the IPCPv6 phase ' the DHCPv6-PD port plugin to request a pool prefix and DNS server list. the IPv6 pool prefix will be used for both PPP-IPv6 interface global address and the DHCPv6 hosts behind the CPE.

DEFAULT

icmpv6

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-ipv6_pool_prefix_len

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 pool prefix length. Subtracting this from the address prefix length provides the size of the PPP IP pool.(DEFAULT 48)

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Pool prefix length. The difference between the address and pool prefix lengths determine the size of the IPv6 IP pool

DEFAULT

 None

-ipv6_pool_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 pool prefix.(DEFAULT 0::)

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Pool prefix length. The difference between the address and pool prefix lengths determine the size of the IPv6 IP pool

DEFAULT

00 00 00 00 00 00 00 00

-ipv6_pool_addr_prefix_len

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 address prefix length.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The IPv6 address prefix length.

DEFAULT

 None

-ppp_local_iid

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The local base IPv6 interface ID.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The local base IPv6 interface ID.

DEFAULT

00 00 00 00 00 00 00 00

-ppp_local_ip

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The first address assigned on the local PPP node.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The first address assigned on the local PPP node.

DEFAULT

2.2.2.2

-ppp_local_ip_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The value by which ppp_local_ip is incremented for each session.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The value by which ppp_local_ip is incremented for each session.

DEFAULT

0.0.0.1

-ppp_local_iid_step

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Server IPv6CP interface identifier increment, used in conjuction with the base identifier

DEFAULT

 None

-ppp_peer_iid

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The peer base IPv6 interface ID.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The peer base IPv6 interface ID.

DEFAULT

00 00 00 00 00 00 00 00

-ppp_peer_iid_step

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Client IPv6CP interface identifier increment, used in conjuction with the base identifier

DEFAULT

 None

-ppp_peer_ip

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The first address assigned on the peer PPP node.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The first address assigned on the peer PPP node.

DEFAULT

1.1.1.1

-ppp_peer_ip_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The value by which ppp_peer_ip is incremented for each session.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The value by which ppp_peer_ip is incremented for each session.

DEFAULT

 None

-redial

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

If true, enables access ports to redial at the PPPoE level.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

If true, enables access ports to redial at the PPPoE level.

DEFAULT

1

-redial_max

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of redial attempts. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The maximum number of redial attempts. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

20

-redial_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

The time to wait before restarting a session if the call was dropped, expressed in seconds. When using IxNetwork this parameter can take values from the 1-65535 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The time to wait before restarting a session if the call was dropped, expressed in seconds. When using IxNetwork this parameter can take values from the 1-65535 range.

DEFAULT

10

-service_name

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This string is used for matching of the PADO messages for the client. For server ports, this string is also sent by the server as the server name in the PADO message. Any string up to 32 characters in length may be used.The string may contain text characters, plus a specification of the form:%[::]i

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This string is used for matching of the PADO messages for the client. For server ports, this string is also sent by the server as the server name in the PADO message. Any string up to 32 characters in length may be used.The string may contain text characters, plus a specification of the form: %[::]i

DEFAULT

 None

-service_type

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

The type of Access Concentrator matching that is desired.

Valid options are:

any

(DEFAULT) A service name is not required; a null service is sent during Discovery indicating to the access concentrator that the service is not specified.

name

Allows a matching service name to be configured in the service_name option.

DEFAULT

 None

-send_dns_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable RDNSS routing advertisments

DEFAULT

 None

-dns_server_list

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

DNS server list separacted by semicolon. Enabled just for IPv6 and send_dns_options.

DEFAULT

 None

-client_dns_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

request_primary_and_secondary

request_primary_only

accept_addresses_from_server

accept_only_primary_address_from_server

disable_extension

DEFAULT

disable_extension

-client_dns_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

-client_dns_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

-client_netmask_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

request

request_specific_netmask

accept_netmask_from_server

DEFAULT

disable_extension

-client_netmask

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when client_netmask_options is request_specific_netmask

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'client_netmask_options' | value= 'request_specific_netmask' |

-client_wins_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

request_primaryonly_wins

request_primaryandsecondary_wins

accept_addresses_from_server

accept_only_primary_address_from_server

DEFAULT

disable_extension

-client_wins_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when client_wins_options is request_primaryonly_wins or accept_only_primary_address_from_server

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'client_wins_options' | value= 'accept_only_primary_address_from_server' |
'client_wins_options' | value= 'request_primaryonly_wins' |

-client_wins_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when client_wins_options is request_primaryonly_wins

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'client_wins_options' | value= 'request_primaryonly_wins' |

-server_dns_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

accept_requested_addresses

accept_only_requested_primary_address

supply_primary_and_secondary

supply_primary_only

disable_extension

DEFAULT

disable_extension

-server_dns_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

-server_dns_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

-server_netmask_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

request

accept_requested_netmask

supply_netmask

DEFAULT

disable_extension

-server_netmask

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when server_netmask_options is supply_netmask

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'server_netmask_options' | value= 'supply_netmask' |

-server_wins_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

accept_requested_addresses

accept_only_requested_primary_address

supply_primary_and_secondary

supply_primary_only

DEFAULT

disable_extension

-server_wins_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid when server_wins_options is supply_primary_and_secondary or supply_primary_only.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'server_wins_options' | value= 'supply_primary_and_secondary' |
'server_wins_options' | value= 'supply_primary_only' |

-server_wins_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid when server_wins_options is supply_primary_and_secondary.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'server_wins_options' | value= 'supply_primary_and_secondary' |

-ra_timeout

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Time to wait (in seconds) for Router Advertisment before NCP up. Valid only for port_role access.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-create_interfaces

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable echo request/reply. This command applies only for PPPv4 clients. Valid only for port_role access.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-attempt_rate

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the rate in attempts/second at which attempts are made to bring up sessions. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the rate in attempts/second at which attempts are made to bring up sessions. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

100

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-attempt_max_outstanding

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

The number of triggered instances of an action that is still awaiting a response or completion

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-attempt_interval

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Time interval used to calculate the rate for triggering an action(rate = count/interval)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-attempt_enabled

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-attempt_scale_mode

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Indicates whether the control is specified per port or per device group. This setting is global for all the pppoxclient protocols configured in the ixncfg and can be configured just when handle is /globals (when the user wants to configure just the global settings)

Valid options are:

port

device_group

DEFAULT

port

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-disconnect_rate

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the rate in disconnects/s at which sessions are disconnected. This parameter can take values from the 1-1000 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the rate in disconnects/s at which sessions are disconnected. This parameter can take values from the 1-1000 range.

DEFAULT

100

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-disconnect_max_outstanding

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

The number of triggered instances of an action that is still awaiting a response or completion

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-disconnect_interval

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Time interval used to calculate the rate for triggering an action(rate = count/interval)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-disconnect_enabled

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-disconnect_scale_mode

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Indicates whether the control is specified per port or per device group. This setting is global for all the pppoxclient protocols configured in the ixncfg and can be configured just when handle is /globals (when the user wants to configure just the global settings)

Valid options are:

port

device_group

DEFAULT

port

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-enable_session_lifetime

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable session lifetime

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-min_lifetime

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Minimum session lifetime (in seconds)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-max_lifetime

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Maximum session lifetime (in seconds)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-enable_session_lifetime_restart

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable automatic session restart after stop at lifetime expiry

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-max_session_lifetime_restarts

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Maximum number of times each session is automatically restarted

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-unlimited_session_lifetime_restarts

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Allow each session to always be automatically restarted

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

-accept_any_auth_value

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Configures a PAP/CHAP authenticator to accept all offered usernames, passwords, and base domain names

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'network' |

-port_handle

Supported platforms Details

IxNetwork [M]

DESCRIPTION

The port on which the PPPoX sessions is to be created.Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The port on which the PPPoX sessions is to be created. Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

-protocol

Supported platforms Details

IxNetwork [M]

DESCRIPTION

Type of sessions to be configured. Valid options are:pppoapppoeoapppoeDependencies: -mode add (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Type of sessions to be configured. Valid options are: pppoa pppoeoa pppoe Only the pppoe options is supported.

Valid options are:

pppoe

pppoeoa

pppoa

DEFAULT

pppoe

-vci

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting VCI for PPPoA and PPPoEoA.

DEFAULT

 None

-vci_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to VCI, PPPoA, and PPPoEoA only.

DEFAULT

 None

-vci_count

Supported platforms Details

IxNetwork

DESCRIPTION

Number of VCIs.When using IxNetwork this parameter can take values from the 1-65504 range.

DEFAULT

 None

-addr_count_per_vci

Supported platforms Details

IxNetwork

DESCRIPTION

VCI value. When this number is reached, an increment operation is initiated. This parameter is valid only when using IxTclNetwork API.Valid values: 1 - 65535.

DEFAULT

1

-vpi

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting VPI for PPPoA and PPPoEoA.

DEFAULT

 None

-vpi_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to VPI, PPPoA and PPPoEoA only.

DEFAULT

 None

-vpi_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Number of VPIs.

DEFAULT

 None

-addr_count_per_vpi

Supported platforms Details

IxNetwork

DESCRIPTION

VPI value. When this number is reached, an increment operation is initiated. This parameter is valid only when using IxTclNetwork API.Valid values: 1- 65535.

DEFAULT

1

-pvc_incr_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

vpi - increment VPI first then VCI (all based on the info configured)vci - (DEFAULT) increment first VCI then VPIboth - increment both VPI and VCI at the same time

DEFAULT

 None

-encap

Supported platforms Details

IxNetwork [M]

DESCRIPTION

Encapsulation type for session. Valid options are:ethernet_ii - Ethernet (valid for -protocol pppoe)ethernet_ii_vlan - Ethernet with VLAN (valid for -protocol pppoe)ethernet_ii_qinq - Ethernet with stacked VLAN (valid for -protocol pppoe)vc_mux - VC Mux Bridged Ethernet (FCS) (valid for -protocol pppoeoa)VC Mux PPP (valid for -protocol pppoa)vc_mux_routed - VC Mux IPv4/IPv6 Routed (valid for -protocol pppoa)vc_mux_nofcs - VC Mux Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)llcsnap - LLC Bridged Ethernet (FCS) (valid for -protocol pppoeoa)LLC Encap PPP (valid for -protocol pppoa)llcsnap_routed - LLC Routed AAL5 Snap (valid for -protocol pppoa)llcsnap_nofcs - LLC Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration) and -protocol.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Encapsulation type for session. Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration) and -protocol.

Valid options are:

ethernet_ii

Ethernet (valid for -protocol pppoe)

ethernet_ii_vlan

Ethernet with VLAN (valid for -protocol pppoe)

ethernet_ii_qinq

Ethernet with stacked VLAN (valid for -protocol pppoe)

vc_mux

VC Mux Bridged Ethernet (FCS) (valid for -protocol pppoeoa)

vc_mux_routed

VC Mux IPv4/IPv6 Routed (valid for -protocol pppoa)

vc_mux_nofcs

VC Mux Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)

llcsnap

LLC Bridged Ethernet (FCS) (valid for -protocol pppoeoa)

llcsnap_routed

LLC Routed AAL5 Snap (valid for -protocol pppoa)

llcsnap_nofcs

LLC Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)

DEFAULT

 None

-address_per_vlan

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

How often a new outer VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

How often a new outer VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

-address_per_svlan

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

How often a new inner VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

How often a new inner VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

-qinq_incr_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

inner - Increment the inner VLAN ID. Based on the vlan_id parameter first then increment the outer vlan_id_outer parameters next.outer - Increment the outer first then inner.both - (DEFAULT) Increment both inner and outer at the same time.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

inner

Increment the inner VLAN ID. Based on the vlan_id parameter first then increment the outer vlan_id_outer parameters next.

outer

Increment the outer first then inner.

both

(DEFAULT) Increment both inner and outer at the same time.

DEFAULT

both

-vlan_id_outer

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting outer VLAN ID, applies to PPPoE w/Stacked VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting outer VLAN ID, applies to PPPoE w/Stacked VLAN only.

DEFAULT

1

-vlan_id_outer_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Number of outer VLAN IDs, applies to PPPoE w/Stacked VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Number of outer VLAN IDs, applies to PPPoE w/Stacked VLAN only.

DEFAULT

4094

-vlan_id_outer_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to outer VLAN ID, PPPoEoE w/Stacked VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Step value applied to outer VLAN ID, PPPoEoE w/Stacked VLAN only.

DEFAULT

1

-vlan_user_priority_count

Supported platforms Details

-password_wildcard

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables wildcard substituation in the password field.Notes: If mode is modify, all the wildcard parameters (password username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables wildcard substituation in the password field. Notes: If mode is modify, all the wildcard parameters (password username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

0

-username_wildcard

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

0

-wildcard_pound_start

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting value for wildcard symbol 1 (\#) substitution. It is also valid to use # as the substitution symbol.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting value for wildcard symbol 1 (\) substitution. It is also valid to use as the substitution symbol. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

0

-wildcard_pound_end

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Ending value for wildcard symbol 1 (\#) substitution. It is also valid to use # as the substitution symbol.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.It must be the same format as for wildcard_pound_start.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Ending value for wildcard symbol 1 (\) substitution. It is also valid to use as the substitution symbol. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002. It must be the same format as for wildcard_pound_start.

DEFAULT

0

-wildcard_question_start

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting value for wildcard symbol 2 (?) substitution.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting value for wildcard symbol 2 (?) substitution. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

0

-wildcard_question_end

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Ending value for wildcard symbol 2 (?) substitution.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.It must be the same format as for wildcard_question_start.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Ending value for wildcard symbol 2 (?) substitution. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002. It must be the same format as for wildcard_question_start.

DEFAULT

0

-ac_select_list

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This option is used in case ac_select_mode is chosen as ac_mac or. ac_name. It specifies the AC MAC address and percentage pair as list:{00:11:00:00:00:11|50 00:11:00:00:00:12|50} or[list 00:11:00:00:00:11|50 00:11:00:00:00:12|50]or it specifies the ac name and percentage pair as list:{ciscoAC1|60 ciscoAC2|40} or [list ciscoAC1|60 ciscoAC2|40]

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This option is used in case ac_select_mode is chosen as ac_mac or. ac_name. It specifies the AC MAC address and percentage pair as list: {00:11:00:00:00:11|50 00:11:00:00:00:12|50} or [list 00:11:00:00:00:11|50 00:11:00:00:00:12|50] or it specifies the ac name and percentage pair as list: {ciscoAC1|60 ciscoAC2|40} or [list ciscoAC1|60 ciscoAC2|40]

DEFAULT

 None

-enable_throttling

Supported platforms Details

-enable_setup_throttling

Supported platforms Details

-enable_multicast

Supported platforms Details

-local_magic

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

0 - Enable negotiaton of magic numbers.1 - (DEFAULT) Disable negotiation of magic numbers.

DEFAULT

 None

-term_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a Terminate Request.

DEFAULT

 None

-lcp_max_failure

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Number of Configure-Nak packets received before abandon link setup

DEFAULT

 None

-max_outstanding

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the maximum number of sessions in progress, which includes the sessions in the process of either coming up or disconnecting, at one time. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of sessions in progress, which includes the sessions in the process of either coming up or disconnecting, at one time. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

1000

-dhcpv6_hosts_enable

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

0 - Configure standard PPPoE 1 - Enable using DHCPv6 hosts behind PPP CPE feature.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access' and -mode is 'create'. Configurations created with -dhcpv6_hosts_enable '0' cannot coexist on the same port with ranges created with -dhcpv6_hosts_enable 1.

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

Valid choices are: 0 ' Configure standard PPPoE 1 ' Enable using DHCPv6 hosts behind PPP CPE feature. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access' and 'mode is 'create'. Configurations created with 'dhcpv6_hosts_enable '0' cannot coexist on the same port with ranges created with 'dhcpv6_hosts_enable 1.

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'mode' | value= 'create' |

-dhcp6_global_echo_ia_info

Supported platforms Details

IxNetwork

DESCRIPTION

If 1 the DHCPv6 client will request the exact address as advertised by the server. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

0

(DEFAULT) Disabled

1

Enabled

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

If 1 the DHCPv6 client will request the exact address as advertised by the server. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Valid choices are: 0 - (DEFAULT) Disabled 1 - Enabled

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_max_outstanding_releases

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_max_outstanding_requests

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

20

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

20

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_reb_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_reb_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_rel_max_rc

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 release attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

5

IxNetwork-NGPF

DESCRIPTION

RFC 3315 release attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

5

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_rel_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial release timeout in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial release timeout in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_ren_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

600

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

600

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_ren_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_req_max_rc

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max request retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max request retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_req_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

30

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

30

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_req_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_setup_rate_initial

Supported platforms Details

IxNetwork

DESCRIPTION

Setup rate is the number of clients to start in each second. This value represents the initial value for setup rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Setup rate is the number of clients to start in each second. This value represents the initial value for setup rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_setup_rate_increment

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the increment value for setup rate. This value is applied every second and can be negative. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

-dhcp6_global_setup_rate_max

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the final value for setup rate. The setup rate will not change after this value is reached. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

-dhcp6_global_sol_max_rc

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max solicit retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

3

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max solicit retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

3

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_sol_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

120

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

120

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_sol_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

4

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

4

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_teardown_rate_initial

Supported platforms Details

IxNetwork

DESCRIPTION

Setup rate is the number of clients to stop in each second. This value represents the initial value for teardown rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

50

IxNetwork-NGPF

DESCRIPTION

Setup rate is the number of clients to stop in each second. This value represents the initial value for teardown rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

50

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_global_teardown_rate_increment

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the increment value for teardown rate. This value is applied every second and can be negative. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

50

-dhcp6_global_teardown_rate_max

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the final value for teardown rate. The teardown rate will not change after this value is reached. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

-dhcp6_global_wait_for_completion

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

0

(DEFAULT) Disabled

1

Enabled

DEFAULT

0

-dhcpv6pd_type

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

ppp_client - DHCPv6PDoPPPServerppp_server - DHCPv6PDoPPPClient

DEFAULT

client

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

client

DHCPv6PDoPPPServer

server

DHCPv6PDoPPPClient

DEFAULT

client

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pd_client_range_duid_enterprise_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the vendor's registered Private Enterprise Number as maintained by IANA. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Define the vendor's registered Private Enterprise Number as maintained by IANA. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pd_client_range_duid_type' | value= 'duid_en' |

-dhcp6_pd_client_range_duid_type

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the DHCP unique identifier type. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

duid_en

duid_en

duid_llt

(DEFAULT) duid_llt

duid_ll

duid_ll

DEFAULT

duid_llt

IxNetwork-NGPF

DESCRIPTION

Define the DHCP unique identifier type. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

duid_en

duid_en

duid_llt

(DEFAULT) duid_llt

duid_ll

duid_ll

DEFAULT

duid_llt

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pd_client_range_duid_vendor_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the vendor-assigned unique ID for this range. This ID is incremented automatically for each DHCP client.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Define the vendor-assigned unique ID for this range. This ID is incremented automatically for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pd_client_range_duid_vendor_id_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the step to increment the vendor ID for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

Define the step to increment the vendor ID for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pd_client_range_ia_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the identity association unique ID for this range. This ID is incremented automatically for each DHCP client.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Define the identity association unique ID for this range. This ID is incremented automatically for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is ' access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pd_client_range_ia_id_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the step used to increment dhcp6_pd_client_range_ia_id for each DHCP client.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

Define the step used to increment dhcp6_pd_client_range_ia_id for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pd_client_range_ia_t1

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the suggested time at which the client contacts the server from which the addresses were obtained to extend the lifetimes of the addresses assigned.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

302400

IxNetwork-NGPF

DESCRIPTION

Define the suggested time at which the client contacts the server from which the addresses were obtained to extend the lifetimes of the addresses assigned. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

302400

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pd_client_range_ia_t2

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the suggested time at which the client contacts any available server to extend the lifetimes of the addresses assigned.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

483840

IxNetwork-NGPF

DESCRIPTION

Define the suggested time at which the client contacts any available server to extend the lifetimes of the addresses assigned. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

483840

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pd_client_range_ia_type

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define Identity Association Type.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

iapd

IxNetwork-NGPF

DESCRIPTION

Define Identity Association Type. Valid choices are: IAPD, IANA, IATA, IANA_IAPD Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

iapd

iana

iata

iana_iapd

DEFAULT

iapd

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pd_client_range_param_request_list

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Accepts list of values. Define the list of options in a message between a client and a server. (DEFAULT = {2 7 23 24})Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

{2 7 23 24}

-dhcp6_pd_client_range_renew_timer

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the user-defined lease renewal timer. The value is estimated in seconds and will override the lease renewal timer if it is not zero and is smaller than the server-defined value.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

Define the user-defined lease renewal timer. The value is estimated in seconds and will override the lease renewal timer if it is not zero and is smaller than the server-defined value. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pd_client_range_use_vendor_class_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enable using vendor class id.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

Valid options are:

0

disable

1

enable

DEFAULT

0

-dhcp6_pd_client_range_vendor_class_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This option is used by a client to identify the vendor that manufactured the hardware on which the client is running. (DEFAULT = 'Ixia DHCP Client')Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_use_vendor_class_id is 1

DEFAULT

"Ixia DHCP Client"

-dhcp6_pd_server_range_dns_domain_search_list

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the domain that the client will use when resolving host names with DNS.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the domain that the client will use when resolving host names with DNS.

DEFAULT

 None

-dhcp6_pd_server_range_first_dns_server

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The first DNS server associated with this address pool. This is the first DNS address that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The first DNS server associated with this address pool. This is the first DNS address that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

-dhcp6_pd_server_range_second_dns_server

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The second DNS server associated with this address pool. This is the second (of two) DNS addresses that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The second DNS server associated with this address pool. This is the second (of two) DNS addresses that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

-dhcp6_pd_server_range_subnet_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The prefix value used to subnet the addresses specified in the address pool. Thisis the subnet prefix length advertised in DHCPv6PD Offer and Reply messages.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The prefix value used to subnet the addresses specified in the address pool. This is the subnet prefix length advertised in DHCPv6PD Offer and Reply messages.

DEFAULT

 None

-dhcp6_pd_server_range_start_pool_address

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The starting IPv6 address for this DHCPv6 address pool.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The starting IPv6 address for this DHCPv6 address pool.

DEFAULT

 None

-dhcp6_pgdata_max_outstanding_requests

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

20

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

20

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_setup_rate' | value= '1' |

-dhcp6_pgdata_override_global_setup_rate

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pgdata_setup_rate_initial

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_setup_rate' | value= '1' |

-dhcp6_pgdata_setup_rate_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'.

DEFAULT

0

-dhcp6_pgdata_setup_rate_max

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

10

-dhcp6_pgdata_max_outstanding_releases

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

500

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_teardown_rate' | value= '1' |

-dhcp6_pgdata_override_global_teardown_rate

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

-dhcp6_pgdata_teardown_rate_initial

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Description This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

50

IxNetwork-NGPF

DESCRIPTION

Description This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

50

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_teardown_rate' | value= '1' |

-dhcp6_pgdata_teardown_rate_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

50

-dhcp6_pgdata_teardown_rate_max

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

500

-hosts_range_ip_outer_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter represents the address prefix allocated to the hosts in all of the subnets behind the CPE interface. The default prefix is 64, the minimum is 0, and the maximum is 128.

DEFAULT

64

-hosts_range_ip_prefix_addr

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 prefix to be used for the static host addresses. The default prefix is 3001.

DEFAULT

 None

-hosts_range_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Configures the DHCP Hosts Range count property. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

 None

-hosts_range_eui_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter configures the EUI step to increment 'hosts_range_first_eui ' from the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter hosts_range_count greater than 1

DEFAULT

 None

-hosts_range_first_eui

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Configures the first EUI value of the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

 None

-hosts_range_ip_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Defines the network prefix length associated with the address pool for the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

 None

-hosts_range_subnet_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

It defines the number of subnets for the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

 None

-lease_time_max

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The maximum lease duration, in seconds. The default value is 86,400; the minimum is 300; and the maximum is 30,000,000.

DEFAULT

 None

-lease_time

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The duration of an address lease, in seconds, if the client requesting the lease does not ask for a specific expiration time. The default value is 3600; the minimum is 300; and the maximum is 30,000,000.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The duration of an address lease, in seconds, if the client requesting the lease does not ask for a specific expiration time. The default value is 3600; the minimum is 300; and the maximum is 30,000,000.

DEFAULT

3600

-padi_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADI message.

DEFAULT

 None

-pado_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADO message.

DEFAULT

 None

-padr_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADR message.

DEFAULT

 None

-pads_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADS message.

DEFAULT

 None

-re_connect_on_link_up

Supported platforms Details

-group_ip_count

Supported platforms Details

-group_ip_step

Supported platforms Details

-start_group_ip

Supported platforms Details

-igmp_version

Supported platforms Details

-is_last_subport

Supported platforms Details

-join_leaves_per_second

Supported platforms Details

-l4_src_port

Supported platforms Details

-l4_dst_port

Supported platforms Details

-l4_flow_number

Supported platforms Details

-l4_flow_type

Supported platforms Details

-l4_flow_variant

Supported platforms Details

-mc_enable_general_query

Supported platforms Details

-mc_enable_group_specific_query

Supported platforms Details

-mc_enable_immediate_response

Supported platforms Details

-mc_enable_packing

Supported platforms Details

-mc_enable_router_alert

Supported platforms Details

-mc_enable_suppress_reports

Supported platforms Details

-mc_enable_unsolicited

Supported platforms Details

-mc_group_id

Supported platforms Details

-mc_report_frequency

Supported platforms Details

-ppp_local_mode

Supported platforms Details

-ppp_peer_mode

Supported platforms Details

-enable_delete_config

Supported platforms Details

-flap_repeat_count

Supported platforms Details

-flap_rate

Supported platforms Details

-switch_duration

Supported platforms Details

-watch_duration

Supported platforms Details

-hold_time

Supported platforms Details

-cool_off_time

Supported platforms Details

-dut_assigned_src_addr

Supported platforms Details

-include_id

Supported platforms Details

-sessions_per_vc

Supported platforms Details

-enable_host_uniq

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enables PPPoE Host-Uniq tag

DEFAULT

 None

-host_uniq

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Host-Uniq

DEFAULT

 None

-multiplier

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

number of layer instances per parent instance (multiplier)

DEFAULT

 None

RETURN VALUES

Supported Platform Details

IxNetwork-NGPF

pppox_client_handle

A list containing the pppox client protocol stack handles that were added by the command (if any).

pppox_server_handle

A list containing the pppox server protocol stack handles that were added by the command (if any).

pppox_server_sessions_handle

A list containing the pppox server sessions protocol stack handles that were added by the command (if any).

dhcpv6_client_handle

A list containing the dhcpv6 client protocol stack handles that were added by the command (if any).

dhcpv6_server_handle

A list containing the dhcpv6 server protocol stack handles that were added by the command (if any).

handle

A list containing individual interface, session and/or router handles that were added by the command (if any). Please note that this key will be omitted if the current session or command were run with -return_detailed_handles 0.

IxNetwork-NGPF and IxNetwork and IxOS/IxNetwork-FT

status

$::SUCCESS | $::FAILURE

handles

ppp handles

log

When status is failure, contains more information

EXAMPLES

IxNetwork and IxOS/IxNetwork-FT

See the PPPoE examples in Appendix A, "Example APIs," for specific examples of usage.

SAMPLE INPUT

SAMPLE OUTPUT

NOTES

IxNetwork-NGPF

1) Coded versus functional specification. 2) When -handle is provided with the /globals value the arguments that configure global protocol setting accept both multivalue handles and simple values. When -handle is provided with a a protocol stack handle or a protocol session handle, the arguments that configure global settings will only accept simple values. In this situation, these arguments will configure only the settings of the parent device group or the ports associated with the parent topology. If the current session or command was run with -return_detailed_handles 0 the following keys will be omitted from the command response: handle

IxNetwork and IxOS/IxNetwork-FT

1) Coded versus functional specification.

PERL

NAME - ::<namespace>:: pppox_config

Synopsis | Arguments | Return values | Examples | Sample input | Sample output | Notes

The following table lists the platforms that support the pppox_config command.

Command IxOS/IxNetwork-FT IxNetwork IxNetwork-NGPF

::<namespace>:: pppox_config

Perl API

Scriptgen

Perl API

Scriptgen

Perl API

Scriptgen

No

No

Yes

Yes

Yes

Yes

NAME - <namespace>::pppox_config

DESCRIPTION

IxNetwork, IxOS/IxNetwork-FT

This procedure configures PPPoA, PPPoEoA, PPPoE sessions for the specified test port. This command allows the user to configure a specified number of PPPoX sessions on the test port. Each port can have upto 32000 sessions.

IxNetwork-NGPF

This procedure configures PPPoA, PPPoEoA, PPPoE sessions for the specified test port. This command allows the user to configure a specified number of PPPoX sessions on the test port. Each port can have upto 32000 sessions.

SYNOPSIS - ::<namespace>::pppox_config

List arguments in the alphabetical order or in the reverse alphabetical order.

Arguments

IxOS/IxNetwork-FT

IxNetwork

IxNetwork-NGPF

IxLoad

[port_role

CHOICES access network

CHOICES access network

CHOICES access network

-

]

[handle

-

ANY

ANY

-

]

[protocol_name

-

-

ALPHA

-

]

[unlimited_redial_attempts

-

-

CHOICES 0 1

-

]

[enable_mru_negotiation

-

CHOICES 0 1

CHOICES 0 1

-

]

[desired_mru_rate

-

NUMERIC

NUMERIC

-

]

[max_payload

-

NUMERIC

NUMERIC

-

]

[enable_max_payload

-

CHOICES 0 1

CHOICES 0 1

-

]

[client_ipv6_ncp_configuration

-

-

CHOICES learned request

-

]

[client_ipv4_ncp_configuration

-

-

CHOICES learned request

-

]

[server_ipv6_ncp_configuration

-

-

CHOICES clientmay serveronly

-

]

[server_ipv4_ncp_configuration

-

-

CHOICES clientmay serveronly

-

]

[lcp_enable_accm

-

-

CHOICES 0 1

-

]

[lcp_accm

-

-

ANY

-

]

[num_sessions

RANGE 1 - 32000

RANGE 1 - 32000

RANGE 1 - 32000

-

]

[ac_select_mode

CHOICES first_responding ac_mac ac_name service_name

CHOICES first_responding ac_mac ac_name service_name

CHOICES first_responding ac_mac ac_name

-

]

[ac_match_name

-

-

ALPHA

-

]

[ac_match_mac

-

-

ALPHA

-

]

[auth_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[config_req_timeout

RANGE 1 - 120

RANGE 1 - 120

RANGE 1 - 120

-

]

[echo_req

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[echo_rsp

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[ip_cp

CHOICES ipv4_cp ipv6_cp dual_stack

CHOICES ipv4_cp ipv6_cp dual_stack

CHOICES ipv4_cp ipv6_cp dual_stack

-

]

[ipcp_req_timeout

RANGE 1 - 120

RANGE 1 - 120

RANGE 1 - 120

-

]

[max_auth_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[max_padi_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[max_padr_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[max_terminate_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 0 - 65535

-

]

[padi_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[padr_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[password

ANY

ANY

ALPHA

-

]

[chap_secret

-

-

ALPHA

-

]

[username

ANY

ANY

ALPHA

-

]

[chap_name

-

-

ALPHA

-

]

[vlan_id

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4095

-

]

[vlan_id_count

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 1 - 4094

-

]

[vlan_id_step

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4094

-

]

[vlan_user_priority

RANGE 0 - 7

RANGE 0 - 7

RANGE 0 - 7

-

]

[vlan_user_priority_step

-

-

RANGE 1 - 7

-

]

[vlan_user_priority_outer

RANGE 0 - 7

RANGE 0 - 7

RANGE 0 - 7

-

]

[mode

CHOICES add remove modify

CHOICES add remove modify

CHOICES add remove modify

-

]

[auth_mode

CHOICES none pap chap pap_or_chap

CHOICES none pap chap pap_or_chap

CHOICES none pap chap pap_or_chap

-

]

[echo_req_interval

-

RANGE 1 - 3600

RANGE 1 - 3600

-

]

[mac_addr

MAC

MAC

MAC

-

]

[mac_addr_step

-

MAC

MAC

-

]

[max_configure_req

-

RANGE 1 - 255

RANGE 1 - 255

-

]

[max_ipcp_req

-

RANGE 1 - 255

RANGE 1 - 255

-

]

[ac_name

ANY

ANY

ALPHA

-

]

[actual_rate_downstream

-

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[actual_rate_upstream

-

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[agent_circuit_id

ANY

ANY

ALPHA

-

]

[agent_remote_id

ANY

ANY

ALPHA

-

]

[data_link

-

CHOICES atm_aal5 ethernet

CHOICES atm_aal5 ethernet

-

]

[enable_domain_group_map

-

-

CHOICES 0 1

-

]

[domain_group_map

ANY

ANY

ALPHA

-

]

[enable_client_signal_iwf

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_client_signal_loop_char

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_client_signal_loop_encap

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_client_signal_loop_id

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_server_signal_iwf

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_server_signal_loop_char

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_server_signal_loop_encap

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_server_signal_loop_id

-

CHOICES 0 1

CHOICES 0 1

-

]

[intermediate_agent

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[intermediate_agent_encap1

-

CHOICES na untagged_eth single_tagged_eth

CHOICES na untagged_eth single_tagged_eth

-

]

[intermediate_agent_encap2

-

CHOICES na pppoa_llc pppoa_null ipoa_llc ipoa_null eth_aal5_llc_fcs eth_aal5_llc_no_fcs eth_aal5_null_fcs eth_aal5_null_no_fcs

CHOICES na pppoa_llc pppoa_null ipoa_llc ipoa_null eth_aal5_llc_fcs eth_aal5_llc_no_fcs eth_aal5_null_fcs eth_aal5_null_no_fcs

-

]

[ipv6_global_address_mode

CHOICES icmpv6 dhcpv6_pd

CHOICES icmpv6 dhcpv6_pd

CHOICES icmpv6 dhcpv6_pd

-

]

[ipv6_pool_prefix_len

NUMERIC

NUMERIC

NUMERIC

-

]

[ipv6_pool_prefix

ANY

ANY

IPV6

-

]

[ipv6_pool_addr_prefix_len

NUMERIC

NUMERIC

NUMERIC

-

]

[ppp_local_iid

ANY

ANY

IPV6

-

]

[ppp_local_ip

IPV4

IPV4

IPV4

-

]

[ppp_local_ip_step

IPV4

IPV4

IPV4

-

]

[ppp_local_iid_step

-

-

NUMERIC

-

]

[ppp_peer_iid

ANY

ANY

IPV6

-

]

[ppp_peer_iid_step

-

-

NUMERIC

-

]

[ppp_peer_ip

IPV4

IPV4

IPV4

-

]

[ppp_peer_ip_step

IPV4

IPV4

IPV4

-

]

[redial

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[redial_max

-

RANGE 1 - 255

RANGE 1 - 255

-

]

[redial_timeout

-

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[service_name

ANY

ANY

ALPHA

-

]

[service_type

-

-

CHOICES any name

-

]

[send_dns_options

-

-

CHOICES 0 1

-

]

[dns_server_list

-

-

ANY

-

]

[client_dns_options

-

-

CHOICES request_primary_and_secondary request_primary_only accept_addresses_from_server accept_only_primary_address_from_server disable_extension

-

]

[client_dns_primary_address

-

-

IPV4

-

]

[client_dns_secondary_address

-

-

IPV4

-

]

[client_netmask_options

-

-

CHOICES disable_extension request request_specific_netmask accept_netmask_from_server

-

]

[client_netmask

-

-

IPV4

-

]

[client_wins_options

-

-

CHOICES disable_extension request_primaryonly_wins request_primaryandsecondary_wins accept_addresses_from_server accept_only_primary_address_from_server

-

]

[client_wins_primary_address

-

-

IPV4

-

]

[client_wins_secondary_address

-

-

IPV4

-

]

[server_dns_options

-

-

CHOICES accept_requested_addresses accept_only_requested_primary_address supply_primary_and_secondary supply_primary_only disable_extension

-

]

[server_dns_primary_address

-

-

IPV4

-

]

[server_dns_secondary_address

-

-

IPV4

-

]

[server_netmask_options

-

-

CHOICES disable_extension request accept_requested_netmask supply_netmask

-

]

[server_netmask

-

-

IPV4

-

]

[server_wins_options

-

-

CHOICES disable_extension accept_requested_addresses accept_only_requested_primary_address supply_primary_and_secondary supply_primary_only

-

]

[server_wins_primary_address

-

-

IPV4

-

]

[server_wins_secondary_address

-

-

IPV4

-

]

[ra_timeout

-

-

NUMERIC

-

]

[create_interfaces

-

-

CHOICES 0 1

-

]

[attempt_rate

-

RANGE 1 - 1000

RANGE 1 - 1000

-

]

[attempt_max_outstanding

-

-

RANGE 1 - 1000

-

]

[attempt_interval

-

-

NUMERIC

-

]

[attempt_enabled

-

-

CHOICES 0 1

-

]

[attempt_scale_mode

-

-

CHOICES port device_group

-

]

[disconnect_rate

RANGE 1 - 1000

RANGE 1 - 1000

RANGE 1 - 1000

-

]

[disconnect_max_outstanding

-

-

RANGE 1 - 1000

-

]

[disconnect_interval

-

-

NUMERIC

-

]

[disconnect_enabled

-

-

CHOICES 0 1

-

]

[disconnect_scale_mode

-

-

CHOICES port device_group

-

]

[enable_session_lifetime

-

-

CHOICES 0 1

-

]

[min_lifetime

-

-

NUMERIC

-

]

[max_lifetime

-

-

NUMERIC

-

]

[enable_session_lifetime_restart

-

-

CHOICES 0 1

-

]

[max_session_lifetime_restarts

-

-

NUMERIC

-

]

[unlimited_session_lifetime_restarts

-

-

CHOICES 0 1

-

]

[accept_any_auth_value

-

-

CHOICES 0 1

-

]

[port_handle

-

interface

REGEXP ^[0-9]+/[0-9]+/[0-9]+$

-

]

[protocol

-

CHOICES pppoa pppoeoa pppoe

CHOICES pppoe pppoeoa pppoa

-

]

[vci

RANGE 1 - 65535

RANGE 1 - 65535

-

-

]

[vci_step

RANGE 1 - 65534

RANGE 1 - 65534

-

-

]

[vci_count

-

RANGE 1 - 65504

-

-

]

[addr_count_per_vci

-

RANGE 1 - 65535

-

-

]

[vpi

RANGE 0 - 255

RANGE 0 - 255

-

-

]

[vpi_step

RANGE 1 - 255

RANGE 1 - 255

-

-

]

[vpi_count

RANGE 1 - 256

RANGE 1 - 256

-

-

]

[addr_count_per_vpi

-

RANGE 1 - 65535

-

-

]

[pvc_incr_mode

CHOICES vpi vci both

CHOICES vpi vci both

-

-

]

[encap

-

CHOICES ethernet_ii ethernet_ii_vlan ethernet_ii_qinq vc_mux vc_mux_routed vc_mux_nofcs llcsnap llcsnap_routed llcsnap_nofcs

CHOICES ethernet_ii ethernet_ii_vlan ethernet_ii_qinq vc_mux vc_mux_routed vc_mux_nofcs llcsnap llcsnap_routed llcsnap_nofcs

-

]

[address_per_vlan

RANGE 1 - 1000000000

RANGE 1 - 1000000000

RANGE 1 - 1000000000

-

]

[address_per_svlan

RANGE 1 - 1000000000

RANGE 1 - 1000000000

RANGE 1 - 1000000000

-

]

[qinq_incr_mode

CHOICES inner outer both

CHOICES inner outer both

CHOICES inner outer both

-

]

[vlan_id_outer

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4095

-

]

[vlan_id_outer_count

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 1 - 4094

-

]

[vlan_id_outer_step

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4094

-

]

[vlan_user_priority_count

-

-

-

-

]

[password_wildcard

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[username_wildcard

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[wildcard_pound_start

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[wildcard_pound_end

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[wildcard_question_start

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[wildcard_question_end

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[ac_select_list

KEYLIST

KEYLIST

ANY

-

]

[enable_throttling

-

-

-

-

]

[enable_setup_throttling

-

-

-

-

]

[enable_multicast

-

-

-

-

]

[local_magic

RANGE 0 - 1

RANGE 0 - 1

-

-

]

[term_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

-

-

]

[lcp_max_failure

-

-

NUMERIC

-

]

[max_outstanding

-

RANGE 1 - 1000

RANGE 1 - 1000

-

]

[dhcpv6_hosts_enable

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[dhcp6_global_echo_ia_info

-

CHOICES 0 1

CHOICES 0 1

-

]

[dhcp6_global_max_outstanding_releases

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[dhcp6_global_max_outstanding_requests

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[dhcp6_global_reb_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[dhcp6_global_reb_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_rel_max_rc

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_rel_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_ren_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[dhcp6_global_ren_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_req_max_rc

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_req_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[dhcp6_global_req_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_setup_rate_initial

-

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[dhcp6_global_setup_rate_increment

-

RANGE - 10000

-

-

]

[dhcp6_global_setup_rate_max

-

RANGE 1 - 100000

-

-

]

[dhcp6_global_sol_max_rc

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_sol_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[dhcp6_global_sol_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_teardown_rate_initial

-

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[dhcp6_global_teardown_rate_increment

-

RANGE - 10000

-

-

]

[dhcp6_global_teardown_rate_max

-

RANGE 1 - 100000

-

-

]

[dhcp6_global_wait_for_completion

-

CHOICES 0 1

-

-

]

[dhcpv6pd_type

CHOICES client server

CHOICES client server

CHOICES client server

-

]

[dhcp6_pd_client_range_duid_enterprise_id

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[dhcp6_pd_client_range_duid_type

CHOICES duid_en duid_llt duid_ll

CHOICES duid_en duid_llt duid_ll

CHOICES duid_en duid_llt duid_ll

-

]

[dhcp6_pd_client_range_duid_vendor_id

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[dhcp6_pd_client_range_duid_vendor_id_increment

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[dhcp6_pd_client_range_ia_id

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[dhcp6_pd_client_range_ia_id_increment

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[dhcp6_pd_client_range_ia_t1

RANGE 0 - 2147483647

RANGE 0 - 2147483647

RANGE 0 - 2147483647

-

]

[dhcp6_pd_client_range_ia_t2

RANGE 0 - 2147483647

RANGE 0 - 2147483647

RANGE 0 - 2147483647

-

]

[dhcp6_pd_client_range_ia_type

CHOICES iapd

CHOICES iapd

CHOICES iapd iana iata iana_iapd

-

]

[dhcp6_pd_client_range_param_request_list

NUMERIC

NUMERIC

-

-

]

[dhcp6_pd_client_range_renew_timer

RANGE 0 - 1000000000

RANGE 0 - 1000000000

RANGE 0 - 1000000000

-

]

[dhcp6_pd_client_range_use_vendor_class_id

CHOICES 0 1

CHOICES 0 1

-

-

]

[dhcp6_pd_client_range_vendor_class_id

ANY

ANY

-

-

]

[dhcp6_pd_server_range_dns_domain_search_list

ANY

ANY

ANY

-

]

[dhcp6_pd_server_range_first_dns_server

IP

IP

IP

-

]

[dhcp6_pd_server_range_second_dns_server

IP

IP

IP

-

]

[dhcp6_pd_server_range_subnet_prefix

NUMERIC

NUMERIC

NUMERIC

-

]

[dhcp6_pd_server_range_start_pool_address

IP

IP

IP

-

]

[dhcp6_pgdata_max_outstanding_requests

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[dhcp6_pgdata_override_global_setup_rate

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[dhcp6_pgdata_setup_rate_initial

RANGE 1 - 100000

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[dhcp6_pgdata_setup_rate_increment

RANGE 0 - 100000

RANGE 0 - 100000

-

-

]

[dhcp6_pgdata_setup_rate_max

RANGE 1 - 100000

RANGE 1 - 100000

-

-

]

[dhcp6_pgdata_max_outstanding_releases

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[dhcp6_pgdata_override_global_teardown_rate

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[dhcp6_pgdata_teardown_rate_initial

RANGE 1 - 100000

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[dhcp6_pgdata_teardown_rate_increment

RANGE 0 - 100000

RANGE 0 - 100000

-

-

]

[dhcp6_pgdata_teardown_rate_max

RANGE 1 - 100000

RANGE 1 - 100000

-

-

]

[hosts_range_ip_outer_prefix

NUMERIC

NUMERIC

-

-

]

[hosts_range_ip_prefix_addr

IP

IP

-

-

]

[hosts_range_count

RANGE 1 - 1000000

RANGE 1 - 1000000

-

-

]

[hosts_range_eui_increment

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

-

-

]

[hosts_range_first_eui

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

-

-

]

[hosts_range_ip_prefix

RANGE 64 - 128

RANGE 64 - 128

-

-

]

[hosts_range_subnet_count

RANGE 1 - 32

RANGE 1 - 32

-

-

]

[lease_time_max

RANGE 300 - 30000000

RANGE 300 - 30000000

-

-

]

[lease_time

RANGE 300 - 30000000

RANGE 300 - 30000000

RANGE 300 - 30000000

-

]

[padi_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[pado_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[padr_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[pads_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[re_connect_on_link_up

-

-

-

-

]

[group_ip_count

-

-

-

-

]

[group_ip_step

-

-

-

-

]

[start_group_ip

-

-

-

-

]

[igmp_version

-

-

-

-

]

[is_last_subport

-

-

-

-

]

[join_leaves_per_second

-

-

-

-

]

[l4_src_port

-

-

-

-

]

[l4_dst_port

-

-

-

-

]

[l4_flow_number

-

-

-

-

]

[l4_flow_type

-

-

-

-

]

[l4_flow_variant

-

-

-

-

]

[mc_enable_general_query

-

-

-

-

]

[mc_enable_group_specific_query

-

-

-

-

]

[mc_enable_immediate_response

-

-

-

-

]

[mc_enable_packing

-

-

-

-

]

[mc_enable_router_alert

-

-

-

-

]

[mc_enable_suppress_reports

-

-

-

-

]

[mc_enable_unsolicited

-

-

-

-

]

[mc_group_id

-

-

-

-

]

[mc_report_frequency

-

-

-

-

]

[ppp_local_mode

-

-

-

-

]

[ppp_peer_mode

-

-

-

-

]

[enable_delete_config

-

-

-

-

]

[flap_repeat_count

-

-

-

-

]

[flap_rate

-

-

-

-

]

[switch_duration

-

-

-

-

]

[watch_duration

-

-

-

-

]

[hold_time

-

-

-

-

]

[cool_off_time

-

-

-

-

]

[dut_assigned_src_addr

-

-

-

-

]

[include_id

-

-

-

-

]

[sessions_per_vc

-

-

-

-

]

[enable_host_uniq

-

-

ANY

-

]

[host_uniq

-

-

ANY

-

]

[multiplier

-

-

NUMERIC

-

]

ARGUMENTS

[M] indicates if the argument is mandatory on the supported platform.

port_role

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The role of the port in the test: access or network.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The role of the port in the test: access or network.

Valid options are:

access

is PPPoX client

network

is PPPoX server

DEFAULT

 None

handle

Supported platforms Details

IxNetwork

DESCRIPTION

PPPoX handle of a configuration to be modified or removed.Dependencies: only available when IxNetwork is used for the PPPoX configuration.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

PPPoX handle of a configuration to be modified or removed. Dependencies: only available when IxNetwork is used for the PPPoX configuration. When -handle is provided with the /globals value the arguments that configure global protocol setting accept both multivalue handles and simple values. When -handle is provided with a a protocol stack handle or a protocol session handle, the arguments that configure global settings will only accept simple values. In this situation, these arguments will configure only the settings of the parent device group or the ports associated with the parent topology.

DEFAULT

 None

protocol_name

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

unlimited_redial_attempts

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

If checked, PPPoE unlimited redial attempts is enabled

DEFAULT

 None

enable_mru_negotiation

Supported platforms Details

IxNetwork

DESCRIPTION

Enables the MRU Negotiation.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enable MRU Negotiation

DEFAULT

 None

desired_mru_rate

Supported platforms Details

IxNetwork

DESCRIPTION

Max Transmit Unit for PPP.

DEFAULT

1492

IxNetwork-NGPF

DESCRIPTION

Max Transmit Unit for PPP

DEFAULT

 None

max_payload

Supported platforms Details

IxNetwork

DESCRIPTION

Max Payload. Valid only when enable_max_payload is enabled.

DEFAULT

1492

IxNetwork-NGPF

DESCRIPTION

Max Payload. Valid only when enable_max_payload is enabled.

DEFAULT

 None

enable_max_payload

Supported platforms Details

IxNetwork

DESCRIPTION

Enables PPP Max Payload tag.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables PPP Max Payload tag

DEFAULT

 None

client_ipv6_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv6_cp or dual_stack

Valid options are:

learned

request

DEFAULT

learned

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

client_ipv4_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv4_cp or dual_stack

Valid options are:

learned

request

DEFAULT

learned

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

server_ipv6_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv6_cp or dual_stack

Valid options are:

clientmay

serveronly

DEFAULT

clientmay

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

server_ipv4_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv4_cp or dual_stack

Valid options are:

clientmay

serveronly

DEFAULT

clientmay

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

lcp_enable_accm

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable Async-Control-Character-Map

DEFAULT

 None

lcp_accm

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Async-Control-Character-Map. Valid only when lcp_enable_accm is enabled.

DEFAULT

 None

num_sessions

Supported platforms Details

IxNetwork [M] , IxOS/IxNetwork-FT [M]

DESCRIPTION

PPP sessions to configure, applies to PPPoEoE and PPPoEoA only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The number of PPP sessions to configure. For PPP servers this will configure the number of sessions supprted by each server. For PPP clients this will configure the number of client sessions that are available.

DEFAULT

 None

ac_select_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

There are various ways AC can be selected based on the PADO first_responding - (DEFAULT)ac_mac - Specify the AC MAC Address and percentage pair using -ac_select_list.ac_name - Specify the AC Name and percentage pair using -ac_select_list option.service_name

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

There are various ways AC can be selected based on the PADO received from AC.

Valid options are:

first_responding

(DEFAULT)

ac_mac

Specify the AC MAC Address and percentage pair using -ac_select_list.

ac_name

Specify the AC Name and percentage pair using -ac_select_list option.

DEFAULT

first_responding

ac_match_name

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

ac_match_mac

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

auth_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an authentication Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an authentication Request.

DEFAULT

5

config_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a Configure Request or Terminate Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a Configure Request or Terminate Request.

DEFAULT

5

echo_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When set to 1, enables Echo Requests, when set to 0, disables Echo Requests.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When set to 1, enables Echo Requests, when set to 0, disables Echo Requests.

DEFAULT

0

echo_rsp

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

0 - Disable sending of the echo Responses.1 - (DEFAULT) Enable Echo Replies.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This can be used to do negative testing. Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration). Valid choices are: 0 - Disable sending of the echo Responses. 1 - (DEFAULT) Enable Echo Replies.

DEFAULT

1

ip_cp

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Not defined

Valid options are:

ipv4_cp

IPv4 Control Protocol. When dhcpv6_hosts_enable is 1 a PPPoX IPv4

ipv6_cp

IPv6 Control Protocol. When dhcpv6_hosts_enable is 1 a DHCPv6 behind

dual_stack

Valid only when dhcpv6_hosts_enable is 1. A dual stack DHCPv6 behind

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

ipv4_cp

IPv4 Control Protocol. When dhcpv6_hosts_enable is 1 a PPPoX IPv4 range will be created that can coexist with other ranges from the same port created with dhcpv6_hosts_enable 1. An error will be issued if dhcpv6_hosts_enable is 0 and other ranges created with dhcpv6_hosts_enable 1 exist on the same port.

ipv6_cp

IPv6 Control Protocol. When dhcpv6_hosts_enable is 1 a DHCPv6 behind PPP CPE range will be created. An error will be issued if dhcpv6_hosts_enable is 0 and other ranges created with dhcpv6_hosts_enable 1 exist on the same port.

dual_stack

Valid only when dhcpv6_hosts_enable is 1. A dual stack DHCPv6 behind PPP CPE range will be created. An error will be issued if other ranges created with dhcpv6_hosts_enable 0 exist on the same port.

DEFAULT

ipv4_cp

ipcp_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an IPCP configure request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an IPCP configure request.

DEFAULT

5

max_auth_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of Authentication Requests that can be sent without getting an authentication response from the DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of Authentication Requests that can be sent without getting an authentication response from the DUT.

DEFAULT

10

max_padi_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of PADI Requests that can be sent without getting a PADO from the DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of PADI Requests that can be sent without getting a PADO from the DUT.

DEFAULT

10

max_padr_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of PADR Requests that can be sent without getting a PADS from the DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of PADR Requests that can be sent without getting a PADS from the DUT.

DEFAULT

10

max_terminate_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of Terminate Requests that can be sent without acknowledgement.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of Terminate Requests that can be sent without acknowledgement.

DEFAULT

10

padi_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADI Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADI Request.

DEFAULT

5

padr_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADR Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADR Request.

DEFAULT

5

password

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Password, PAP and CHAP only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Password, PAP and CHAP only.

DEFAULT

 None

chap_secret

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Secret when CHAP Authentication is being used

DEFAULT

 None

username

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Username, PAP and CHAP only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Username, PAP and CHAP only.

DEFAULT

 None

chap_name

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

User name when CHAP Authentication is being used

DEFAULT

 None

vlan_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting VLAN ID, applies to PPPoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting VLAN ID, applies to PPPoE w/VLAN only.

DEFAULT

1

vlan_id_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Number of VLAN IDs, applies to PPPoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Number of VLAN IDs, applies to PPPoE w/VLAN only.

DEFAULT

4094

vlan_id_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to VLAN ID, PPPoEoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Step value applied to VLAN ID, PPPoEoE w/VLAN only.

DEFAULT

1

vlan_user_priority

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

0

vlan_user_priority_step

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

1

vlan_user_priority_outer

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Outer VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Outer VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

0

mode

Supported platforms Details

IxNetwork [M] , IxOS/IxNetwork-FT [M]

DESCRIPTION

Add - add a new PPPoX configurationModify - modify an existing PPPoX configuration (specified by -handle)Remove - Remove an existing PPPoX configuration (specified by -handle)

DEFAULT

 None

IxNetwork-NGPF [M]

DESCRIPTION

Dependencies: only available when IxNetwork is used for the PPPoX configuration.

Valid options are:

add

add a new PPPoX configuration

remove

Remove an existing PPPoX configuration (specified by -handle)

modify

modify an existing PPPoX configuration (specified by -handle)

DEFAULT

 None

auth_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

none - (DEFAULT)papchappap_or_chap - Accept both PAP and CHAP offered by DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Authentication mode.

Valid options are:

none

(DEFAULT)

pap

chap

pap_or_chap

Accept both PAP and CHAP offered by DUT.

DEFAULT

 None

echo_req_interval

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the time interval in seconds for sending LCP echo requests. Valid only if -echo_req is set to 1. When using IxNetwork this parameter can take values from the 1-3600 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the time interval in seconds for sending LCP echo requests. Valid only if -echo_req is set to 1. When using IxNetwork this parameter can take values from the 1-3600 range.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'echo_req' | value= '1' |

mac_addr

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

DEFAULT

 None

mac_addr_step

Supported platforms Details

IxNetwork

DESCRIPTION

Dependencies: -mode add or modify (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Dependencies: -mode add or modify (when IxNetwork is used for the PPPoX configuration).

DEFAULT

0000.0000.0001

max_configure_req

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the maximum number of LCP Configure Requests that can be sent without acknowledgement. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of LCP Configure Requests that can be sent without acknowledgement. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

max_ipcp_req

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the maximum number of IPCP configure requests that can be sent without getting an ack from the DUT. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of IPCP configure requests that can be sent without getting an ack from the DUT. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

ac_name

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When the port is used as a server, this is the name sent in the PADO message.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When the port is used as a server, this is the name sent in the PADO message.

DEFAULT

 None

actual_rate_downstream

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual downstream data rate (sub-option 0x81), in kbps. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual downstream data rate (sub-option 0x81), in kbps. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

actual_rate_upstream

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual upstream data rate (sub-option 0x82), in kbps Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual upstream data rate (sub-option 0x82), in kbps Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

agent_circuit_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters.The agent_circuit_id field is defined in strings of the form:%::i.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters.The agent_circuit_id field is defined in strings of the form: %::i.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

agent_remote_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters. The agentRemoteId field is defined in strings of the form:%::i.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters. The agentRemoteId field is defined in strings of the form: %::i.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

data_link

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the data-link protocol on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the data-link protocol on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

Valid options are:

atm_aal5

ethernet

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

enable_domain_group_map

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

This parameter configures the Interworking function (IWF). For details refer to -enable_server_signal_iwf. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

domain_group_map

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

List of domain group to LNS IP mapping. Each domain group can have thousands of domains. With the help of domain group it is very easy to map thousands of domains to one or more LNS IP addresses. Each domain group is defined as: { { domain_name } {lnsIP1 lnsIP2} }.Where domain_name is defined as:name : name to be used for the domain(s).wc {1|0} : enables wildcard substitution in the name field. wc_start : starting value for wildcard symbol for the name (%) substitutionwc_end : ending value for wildcard symbol for the name (%) substitutionlnsIP : LNS IP address list to be used for this domain.Example: You want to set up 20 domains, out of which cisco1.com to cisco10.com going to 192.1.1.1 & 192.1.1.2 and cisco11.com to cisco20.com going to 192.1.2.1. Also assume number of sessions per tunnel is 5. Your domain group list will look like:{ { {domain%.com 1 1 10} {192.1.1.1 192.1.1.2} }{ {domain%.com 1 11 20} {192.1.2.1} } }Tunnel Allocation will look like this:Sessions 1-5, tunnel1 dst 192.1.1.1;Sessions 5-10, tunnel2 dst 192.1.1.2;Sessions 11-15, tunnel3 dst 192.1.2.1;Sessions 16-20, tunnel4 dst 192.1.2.1.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

List of domain group to LNS IP mapping. Each domain group can have thousands of domains. With the help of domain group it is very easy to map thousands of domains to one or more LNS IP addresses. Each domain group is defined as: { { domain_name } {lnsIP1 lnsIP2} }. Where domain_name is defined as: {name wc wc_start wc_end } name : name to be used for the domain(s). wc {1|0} : enables wildcard substitution in the name field. wc_start : starting value for wildcard symbol for the name (%) substitution wc_end : ending value for wildcard symbol for the name (%) substitution lnsIP : LNS IP address list to be used for this domain. Example: You want to set up 20 domains, out of which cisco1.com to cisco10.com going to 192.1.1.1 & 192.1.1.2 and cisco11.com to cisco20.com going to 192.1.2.1. Also assume number of sessions per tunnel is 5. Your domain group list will look like: { { {cisco%.com 1 1 10} {192.1.1.1 192.1.1.2} } { {cisco%.com 1 11 20} {192.1.2.1} } } Tunnel Allocation will look like this: Sessions 1-5, tunnel1 dst 192.1.1.1; Sessions 5-10, tunnel2 dst 192.1.1.2; Sessions 11-15, tunnel3 dst 192.1.2.1; Sessions 16-20, tunnel4 dst 192.1.2.1.

DEFAULT

 None

enable_client_signal_iwf

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures the Interworking function (IWF). For details refer to -enable_server_signal_iwf. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures the Interworking function (IWF). For details refer to -enable_server_signal_iwf. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

enable_client_signal_loop_char

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

enable_client_signal_loop_encap

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encapWhen this parameter is enabled, the discovery packets will include the 0x90 sub-option.Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap When this parameter is enabled, the discovery packets will include the 0x90 sub-option. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

enable_client_signal_loop_id

Supported platforms Details

IxNetwork

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

enable_server_signal_iwf

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures the Interworking function (IWF) - When ATM is supported on the DSL line (the U interface), the Access Node must provide protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures the Interworking function (IWF) - When ATM is supported on the DSL line (the U interface), the Access Node must provide protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

enable_server_signal_loop_char

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics - the Access Node reports the access loop sync rate and interleave delay to the Broadband Network Gateway (BNG). This allows the BNG to enable policy decisions and advanced QoS enforcement, while potentially taking full advantage of the data rate of a given access loop. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics - the Access Node reports the access loop sync rate and interleave delay to the Broadband Network Gateway (BNG). This allows the BNG to enable policy decisions and advanced QoS enforcement, while potentially taking full advantage of the data rate of a given access loop. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

enable_server_signal_loop_encap

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90): for access loop encapsulation the PPPoE intermediate agent inserts information in the PPPoE packets to signal to the BNG the data-link protocol and the encapsulation overhead on the Access Loop. For signaling of interworked sessions the Access Node must signal the BNG that a given PPPoE session is going to carry interworked PPPoA traffic. When this parameter is enabled, the discovery packets will include the 0x90 sub-option. Available only when IxNetwork is used for PPPoX configurations.Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90): for access loop encapsulation the PPPoE intermediate agent inserts information in the PPPoE packets to signal to the BNG the data-link protocol and the encapsulation overhead on the Access Loop. For signaling of interworked sessions the Access Node must signal the BNG that a given PPPoE session is going to carry interworked PPPoA traffic. When this parameter is enabled, the discovery packets will include the 0x90 sub-option. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

enable_server_signal_loop_id

Supported platforms Details

IxNetwork

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

intermediate_agent

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables the Intermediate Agent feature. This feature allows for the testing of DSLAM/BRAS devices that translate from PPPoA traffic to PPPoE traffic. When this option is true, the program inserts agent_circuit_id and agent_remote_id values into PPPoE tags for each PPPoE session.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables the Intermediate Agent feature. This feature allows for the testing of DSLAM/BRAS devices that translate from PPPoA traffic to PPPoE traffic. When this option is true, the program inserts agent_circuit_id and agent_remote_id values into PPPoE tags for each PPPoE session.

DEFAULT

 None

intermediate_agent_encap1

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

Valid options are:

na

untagged_eth

single_tagged_eth

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

intermediate_agent_encap2

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations.Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

Valid options are:

na

pppoa_llc

pppoa_null

ipoa_llc

ipoa_null

eth_aal5_llc_fcs

eth_aal5_llc_no_fcs

eth_aal5_null_fcs

eth_aal5_null_no_fcs

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

ipv6_global_address_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Select the protocol used to set IPv6 global interfaces on PPP interfaces. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

Not defined

x

trigger

for each session, after completing

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Select the protocol used to set IPv6 global interfaces on PPP interfaces. This configuration applies at port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

icmpv6

(DEFAULT) IPv6 global address is fetched like before ' using ICMPV4 RA/RS messages.

dhcpv6_pd

PPP plugin will trigger - for each session, after completing the IPCPv6 phase ' the DHCPv6-PD port plugin to request a pool prefix and DNS server list. the IPv6 pool prefix will be used for both PPP-IPv6 interface global address and the DHCPv6 hosts behind the CPE.

DEFAULT

icmpv6

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

ipv6_pool_prefix_len

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 pool prefix length. Subtracting this from the address prefix length provides the size of the PPP IP pool.(DEFAULT 48)

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Pool prefix length. The difference between the address and pool prefix lengths determine the size of the IPv6 IP pool

DEFAULT

 None

ipv6_pool_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 pool prefix.(DEFAULT 0::)

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Pool prefix length. The difference between the address and pool prefix lengths determine the size of the IPv6 IP pool

DEFAULT

00 00 00 00 00 00 00 00

ipv6_pool_addr_prefix_len

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 address prefix length.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The IPv6 address prefix length.

DEFAULT

 None

ppp_local_iid

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The local base IPv6 interface ID.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The local base IPv6 interface ID.

DEFAULT

00 00 00 00 00 00 00 00

ppp_local_ip

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The first address assigned on the local PPP node.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The first address assigned on the local PPP node.

DEFAULT

2.2.2.2

ppp_local_ip_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The value by which ppp_local_ip is incremented for each session.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The value by which ppp_local_ip is incremented for each session.

DEFAULT

0.0.0.1

ppp_local_iid_step

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Server IPv6CP interface identifier increment, used in conjuction with the base identifier

DEFAULT

 None

ppp_peer_iid

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The peer base IPv6 interface ID.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The peer base IPv6 interface ID.

DEFAULT

00 00 00 00 00 00 00 00

ppp_peer_iid_step

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Client IPv6CP interface identifier increment, used in conjuction with the base identifier

DEFAULT

 None

ppp_peer_ip

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The first address assigned on the peer PPP node.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The first address assigned on the peer PPP node.

DEFAULT

1.1.1.1

ppp_peer_ip_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The value by which ppp_peer_ip is incremented for each session.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The value by which ppp_peer_ip is incremented for each session.

DEFAULT

 None

redial

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

If true, enables access ports to redial at the PPPoE level.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

If true, enables access ports to redial at the PPPoE level.

DEFAULT

1

redial_max

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of redial attempts. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The maximum number of redial attempts. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

20

redial_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

The time to wait before restarting a session if the call was dropped, expressed in seconds. When using IxNetwork this parameter can take values from the 1-65535 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The time to wait before restarting a session if the call was dropped, expressed in seconds. When using IxNetwork this parameter can take values from the 1-65535 range.

DEFAULT

10

service_name

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This string is used for matching of the PADO messages for the client. For server ports, this string is also sent by the server as the server name in the PADO message. Any string up to 32 characters in length may be used.The string may contain text characters, plus a specification of the form:%[::]i

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This string is used for matching of the PADO messages for the client. For server ports, this string is also sent by the server as the server name in the PADO message. Any string up to 32 characters in length may be used.The string may contain text characters, plus a specification of the form: %[::]i

DEFAULT

 None

service_type

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

The type of Access Concentrator matching that is desired.

Valid options are:

any

(DEFAULT) A service name is not required; a null service is sent during Discovery indicating to the access concentrator that the service is not specified.

name

Allows a matching service name to be configured in the service_name option.

DEFAULT

 None

send_dns_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable RDNSS routing advertisments

DEFAULT

 None

dns_server_list

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

DNS server list separacted by semicolon. Enabled just for IPv6 and send_dns_options.

DEFAULT

 None

client_dns_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

request_primary_and_secondary

request_primary_only

accept_addresses_from_server

accept_only_primary_address_from_server

disable_extension

DEFAULT

disable_extension

client_dns_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

client_dns_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

client_netmask_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

request

request_specific_netmask

accept_netmask_from_server

DEFAULT

disable_extension

client_netmask

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when client_netmask_options is request_specific_netmask

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'client_netmask_options' | value= 'request_specific_netmask' |

client_wins_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

request_primaryonly_wins

request_primaryandsecondary_wins

accept_addresses_from_server

accept_only_primary_address_from_server

DEFAULT

disable_extension

client_wins_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when client_wins_options is request_primaryonly_wins or accept_only_primary_address_from_server

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'client_wins_options' | value= 'accept_only_primary_address_from_server' |
'client_wins_options' | value= 'request_primaryonly_wins' |

client_wins_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when client_wins_options is request_primaryonly_wins

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'client_wins_options' | value= 'request_primaryonly_wins' |

server_dns_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

accept_requested_addresses

accept_only_requested_primary_address

supply_primary_and_secondary

supply_primary_only

disable_extension

DEFAULT

disable_extension

server_dns_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

server_dns_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

server_netmask_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

request

accept_requested_netmask

supply_netmask

DEFAULT

disable_extension

server_netmask

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when server_netmask_options is supply_netmask

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'server_netmask_options' | value= 'supply_netmask' |

server_wins_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

accept_requested_addresses

accept_only_requested_primary_address

supply_primary_and_secondary

supply_primary_only

DEFAULT

disable_extension

server_wins_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid when server_wins_options is supply_primary_and_secondary or supply_primary_only.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'server_wins_options' | value= 'supply_primary_and_secondary' |
'server_wins_options' | value= 'supply_primary_only' |

server_wins_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid when server_wins_options is supply_primary_and_secondary.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'server_wins_options' | value= 'supply_primary_and_secondary' |

ra_timeout

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Time to wait (in seconds) for Router Advertisment before NCP up. Valid only for port_role access.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

create_interfaces

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable echo request/reply. This command applies only for PPPv4 clients. Valid only for port_role access.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

attempt_rate

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the rate in attempts/second at which attempts are made to bring up sessions. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the rate in attempts/second at which attempts are made to bring up sessions. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

100

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

attempt_max_outstanding

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

The number of triggered instances of an action that is still awaiting a response or completion

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

attempt_interval

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Time interval used to calculate the rate for triggering an action(rate = count/interval)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

attempt_enabled

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

attempt_scale_mode

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Indicates whether the control is specified per port or per device group. This setting is global for all the pppoxclient protocols configured in the ixncfg and can be configured just when handle is /globals (when the user wants to configure just the global settings)

Valid options are:

port

device_group

DEFAULT

port

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

disconnect_rate

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the rate in disconnects/s at which sessions are disconnected. This parameter can take values from the 1-1000 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the rate in disconnects/s at which sessions are disconnected. This parameter can take values from the 1-1000 range.

DEFAULT

100

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

disconnect_max_outstanding

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

The number of triggered instances of an action that is still awaiting a response or completion

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

disconnect_interval

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Time interval used to calculate the rate for triggering an action(rate = count/interval)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

disconnect_enabled

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

disconnect_scale_mode

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Indicates whether the control is specified per port or per device group. This setting is global for all the pppoxclient protocols configured in the ixncfg and can be configured just when handle is /globals (when the user wants to configure just the global settings)

Valid options are:

port

device_group

DEFAULT

port

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

enable_session_lifetime

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable session lifetime

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

min_lifetime

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Minimum session lifetime (in seconds)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

max_lifetime

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Maximum session lifetime (in seconds)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

enable_session_lifetime_restart

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable automatic session restart after stop at lifetime expiry

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

max_session_lifetime_restarts

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Maximum number of times each session is automatically restarted

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

unlimited_session_lifetime_restarts

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Allow each session to always be automatically restarted

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

accept_any_auth_value

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Configures a PAP/CHAP authenticator to accept all offered usernames, passwords, and base domain names

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'network' |

port_handle

Supported platforms Details

IxNetwork [M]

DESCRIPTION

The port on which the PPPoX sessions is to be created.Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The port on which the PPPoX sessions is to be created. Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

protocol

Supported platforms Details

IxNetwork [M]

DESCRIPTION

Type of sessions to be configured. Valid options are:pppoapppoeoapppoeDependencies: -mode add (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Type of sessions to be configured. Valid options are: pppoa pppoeoa pppoe Only the pppoe options is supported.

Valid options are:

pppoe

pppoeoa

pppoa

DEFAULT

pppoe

vci

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting VCI for PPPoA and PPPoEoA.

DEFAULT

 None

vci_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to VCI, PPPoA, and PPPoEoA only.

DEFAULT

 None

vci_count

Supported platforms Details

IxNetwork

DESCRIPTION

Number of VCIs.When using IxNetwork this parameter can take values from the 1-65504 range.

DEFAULT

 None

addr_count_per_vci

Supported platforms Details

IxNetwork

DESCRIPTION

VCI value. When this number is reached, an increment operation is initiated. This parameter is valid only when using IxTclNetwork API.Valid values: 1 - 65535.

DEFAULT

1

vpi

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting VPI for PPPoA and PPPoEoA.

DEFAULT

 None

vpi_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to VPI, PPPoA and PPPoEoA only.

DEFAULT

 None

vpi_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Number of VPIs.

DEFAULT

 None

addr_count_per_vpi

Supported platforms Details

IxNetwork

DESCRIPTION

VPI value. When this number is reached, an increment operation is initiated. This parameter is valid only when using IxTclNetwork API.Valid values: 1- 65535.

DEFAULT

1

pvc_incr_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

vpi - increment VPI first then VCI (all based on the info configured)vci - (DEFAULT) increment first VCI then VPIboth - increment both VPI and VCI at the same time

DEFAULT

 None

encap

Supported platforms Details

IxNetwork [M]

DESCRIPTION

Encapsulation type for session. Valid options are:ethernet_ii - Ethernet (valid for -protocol pppoe)ethernet_ii_vlan - Ethernet with VLAN (valid for -protocol pppoe)ethernet_ii_qinq - Ethernet with stacked VLAN (valid for -protocol pppoe)vc_mux - VC Mux Bridged Ethernet (FCS) (valid for -protocol pppoeoa)VC Mux PPP (valid for -protocol pppoa)vc_mux_routed - VC Mux IPv4/IPv6 Routed (valid for -protocol pppoa)vc_mux_nofcs - VC Mux Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)llcsnap - LLC Bridged Ethernet (FCS) (valid for -protocol pppoeoa)LLC Encap PPP (valid for -protocol pppoa)llcsnap_routed - LLC Routed AAL5 Snap (valid for -protocol pppoa)llcsnap_nofcs - LLC Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration) and -protocol.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Encapsulation type for session. Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration) and -protocol.

Valid options are:

ethernet_ii

Ethernet (valid for -protocol pppoe)

ethernet_ii_vlan

Ethernet with VLAN (valid for -protocol pppoe)

ethernet_ii_qinq

Ethernet with stacked VLAN (valid for -protocol pppoe)

vc_mux

VC Mux Bridged Ethernet (FCS) (valid for -protocol pppoeoa)

vc_mux_routed

VC Mux IPv4/IPv6 Routed (valid for -protocol pppoa)

vc_mux_nofcs

VC Mux Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)

llcsnap

LLC Bridged Ethernet (FCS) (valid for -protocol pppoeoa)

llcsnap_routed

LLC Routed AAL5 Snap (valid for -protocol pppoa)

llcsnap_nofcs

LLC Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)

DEFAULT

 None

address_per_vlan

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

How often a new outer VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

How often a new outer VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

address_per_svlan

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

How often a new inner VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

How often a new inner VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

qinq_incr_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

inner - Increment the inner VLAN ID. Based on the vlan_id parameter first then increment the outer vlan_id_outer parameters next.outer - Increment the outer first then inner.both - (DEFAULT) Increment both inner and outer at the same time.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

inner

Increment the inner VLAN ID. Based on the vlan_id parameter first then increment the outer vlan_id_outer parameters next.

outer

Increment the outer first then inner.

both

(DEFAULT) Increment both inner and outer at the same time.

DEFAULT

both

vlan_id_outer

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting outer VLAN ID, applies to PPPoE w/Stacked VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting outer VLAN ID, applies to PPPoE w/Stacked VLAN only.

DEFAULT

1

vlan_id_outer_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Number of outer VLAN IDs, applies to PPPoE w/Stacked VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Number of outer VLAN IDs, applies to PPPoE w/Stacked VLAN only.

DEFAULT

4094

vlan_id_outer_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to outer VLAN ID, PPPoEoE w/Stacked VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Step value applied to outer VLAN ID, PPPoEoE w/Stacked VLAN only.

DEFAULT

1

vlan_user_priority_count

Supported platforms Details

password_wildcard

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables wildcard substituation in the password field.Notes: If mode is modify, all the wildcard parameters (password username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables wildcard substituation in the password field. Notes: If mode is modify, all the wildcard parameters (password username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

0

username_wildcard

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

0

wildcard_pound_start

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting value for wildcard symbol 1 (\#) substitution. It is also valid to use # as the substitution symbol.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting value for wildcard symbol 1 (\) substitution. It is also valid to use as the substitution symbol. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

0

wildcard_pound_end

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Ending value for wildcard symbol 1 (\#) substitution. It is also valid to use # as the substitution symbol.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.It must be the same format as for wildcard_pound_start.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Ending value for wildcard symbol 1 (\) substitution. It is also valid to use as the substitution symbol. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002. It must be the same format as for wildcard_pound_start.

DEFAULT

0

wildcard_question_start

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting value for wildcard symbol 2 (?) substitution.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting value for wildcard symbol 2 (?) substitution. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

0

wildcard_question_end

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Ending value for wildcard symbol 2 (?) substitution.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.It must be the same format as for wildcard_question_start.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Ending value for wildcard symbol 2 (?) substitution. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002. It must be the same format as for wildcard_question_start.

DEFAULT

0

ac_select_list

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This option is used in case ac_select_mode is chosen as ac_mac or. ac_name. It specifies the AC MAC address and percentage pair as list:{00:11:00:00:00:11|50 00:11:00:00:00:12|50} or[list 00:11:00:00:00:11|50 00:11:00:00:00:12|50]or it specifies the ac name and percentage pair as list:{ciscoAC1|60 ciscoAC2|40} or [list ciscoAC1|60 ciscoAC2|40]

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This option is used in case ac_select_mode is chosen as ac_mac or. ac_name. It specifies the AC MAC address and percentage pair as list: {00:11:00:00:00:11|50 00:11:00:00:00:12|50} or [list 00:11:00:00:00:11|50 00:11:00:00:00:12|50] or it specifies the ac name and percentage pair as list: {ciscoAC1|60 ciscoAC2|40} or [list ciscoAC1|60 ciscoAC2|40]

DEFAULT

 None

enable_throttling

Supported platforms Details

enable_setup_throttling

Supported platforms Details

enable_multicast

Supported platforms Details

local_magic

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

0 - Enable negotiaton of magic numbers.1 - (DEFAULT) Disable negotiation of magic numbers.

DEFAULT

 None

term_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a Terminate Request.

DEFAULT

 None

lcp_max_failure

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Number of Configure-Nak packets received before abandon link setup

DEFAULT

 None

max_outstanding

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the maximum number of sessions in progress, which includes the sessions in the process of either coming up or disconnecting, at one time. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of sessions in progress, which includes the sessions in the process of either coming up or disconnecting, at one time. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

1000

dhcpv6_hosts_enable

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

0 - Configure standard PPPoE 1 - Enable using DHCPv6 hosts behind PPP CPE feature.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access' and -mode is 'create'. Configurations created with -dhcpv6_hosts_enable '0' cannot coexist on the same port with ranges created with -dhcpv6_hosts_enable 1.

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

Valid choices are: 0 ' Configure standard PPPoE 1 ' Enable using DHCPv6 hosts behind PPP CPE feature. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access' and 'mode is 'create'. Configurations created with 'dhcpv6_hosts_enable '0' cannot coexist on the same port with ranges created with 'dhcpv6_hosts_enable 1.

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'mode' | value= 'create' |

dhcp6_global_echo_ia_info

Supported platforms Details

IxNetwork

DESCRIPTION

If 1 the DHCPv6 client will request the exact address as advertised by the server. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

0

(DEFAULT) Disabled

1

Enabled

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

If 1 the DHCPv6 client will request the exact address as advertised by the server. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Valid choices are: 0 - (DEFAULT) Disabled 1 - Enabled

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_max_outstanding_releases

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_max_outstanding_requests

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

20

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

20

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_reb_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_reb_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_rel_max_rc

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 release attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

5

IxNetwork-NGPF

DESCRIPTION

RFC 3315 release attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

5

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_rel_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial release timeout in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial release timeout in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_ren_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

600

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

600

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_ren_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_req_max_rc

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max request retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max request retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_req_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

30

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

30

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_req_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_setup_rate_initial

Supported platforms Details

IxNetwork

DESCRIPTION

Setup rate is the number of clients to start in each second. This value represents the initial value for setup rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Setup rate is the number of clients to start in each second. This value represents the initial value for setup rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_setup_rate_increment

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the increment value for setup rate. This value is applied every second and can be negative. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

dhcp6_global_setup_rate_max

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the final value for setup rate. The setup rate will not change after this value is reached. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

dhcp6_global_sol_max_rc

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max solicit retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

3

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max solicit retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

3

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_sol_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

120

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

120

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_sol_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

4

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

4

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_teardown_rate_initial

Supported platforms Details

IxNetwork

DESCRIPTION

Setup rate is the number of clients to stop in each second. This value represents the initial value for teardown rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

50

IxNetwork-NGPF

DESCRIPTION

Setup rate is the number of clients to stop in each second. This value represents the initial value for teardown rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

50

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_teardown_rate_increment

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the increment value for teardown rate. This value is applied every second and can be negative. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

50

dhcp6_global_teardown_rate_max

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the final value for teardown rate. The teardown rate will not change after this value is reached. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

dhcp6_global_wait_for_completion

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

0

(DEFAULT) Disabled

1

Enabled

DEFAULT

0

dhcpv6pd_type

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

ppp_client - DHCPv6PDoPPPServerppp_server - DHCPv6PDoPPPClient

DEFAULT

client

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

client

DHCPv6PDoPPPServer

server

DHCPv6PDoPPPClient

DEFAULT

client

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_duid_enterprise_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the vendor's registered Private Enterprise Number as maintained by IANA. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Define the vendor's registered Private Enterprise Number as maintained by IANA. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pd_client_range_duid_type' | value= 'duid_en' |

dhcp6_pd_client_range_duid_type

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the DHCP unique identifier type. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

duid_en

duid_en

duid_llt

(DEFAULT) duid_llt

duid_ll

duid_ll

DEFAULT

duid_llt

IxNetwork-NGPF

DESCRIPTION

Define the DHCP unique identifier type. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

duid_en

duid_en

duid_llt

(DEFAULT) duid_llt

duid_ll

duid_ll

DEFAULT

duid_llt

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_duid_vendor_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the vendor-assigned unique ID for this range. This ID is incremented automatically for each DHCP client.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Define the vendor-assigned unique ID for this range. This ID is incremented automatically for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_duid_vendor_id_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the step to increment the vendor ID for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

Define the step to increment the vendor ID for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_ia_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the identity association unique ID for this range. This ID is incremented automatically for each DHCP client.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Define the identity association unique ID for this range. This ID is incremented automatically for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is ' access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_ia_id_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the step used to increment dhcp6_pd_client_range_ia_id for each DHCP client.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

Define the step used to increment dhcp6_pd_client_range_ia_id for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_ia_t1

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the suggested time at which the client contacts the server from which the addresses were obtained to extend the lifetimes of the addresses assigned.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

302400

IxNetwork-NGPF

DESCRIPTION

Define the suggested time at which the client contacts the server from which the addresses were obtained to extend the lifetimes of the addresses assigned. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

302400

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_ia_t2

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the suggested time at which the client contacts any available server to extend the lifetimes of the addresses assigned.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

483840

IxNetwork-NGPF

DESCRIPTION

Define the suggested time at which the client contacts any available server to extend the lifetimes of the addresses assigned. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

483840

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_ia_type

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define Identity Association Type.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

iapd

IxNetwork-NGPF

DESCRIPTION

Define Identity Association Type. Valid choices are: IAPD, IANA, IATA, IANA_IAPD Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

iapd

iana

iata

iana_iapd

DEFAULT

iapd

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_param_request_list

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Accepts list of values. Define the list of options in a message between a client and a server. (DEFAULT = {2 7 23 24})Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

{2 7 23 24}

dhcp6_pd_client_range_renew_timer

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the user-defined lease renewal timer. The value is estimated in seconds and will override the lease renewal timer if it is not zero and is smaller than the server-defined value.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

Define the user-defined lease renewal timer. The value is estimated in seconds and will override the lease renewal timer if it is not zero and is smaller than the server-defined value. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_use_vendor_class_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enable using vendor class id.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

Valid options are:

0

disable

1

enable

DEFAULT

0

dhcp6_pd_client_range_vendor_class_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This option is used by a client to identify the vendor that manufactured the hardware on which the client is running. (DEFAULT = 'Ixia DHCP Client')Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_use_vendor_class_id is 1

DEFAULT

"Ixia DHCP Client"

dhcp6_pd_server_range_dns_domain_search_list

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the domain that the client will use when resolving host names with DNS.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the domain that the client will use when resolving host names with DNS.

DEFAULT

 None

dhcp6_pd_server_range_first_dns_server

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The first DNS server associated with this address pool. This is the first DNS address that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The first DNS server associated with this address pool. This is the first DNS address that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

dhcp6_pd_server_range_second_dns_server

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The second DNS server associated with this address pool. This is the second (of two) DNS addresses that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The second DNS server associated with this address pool. This is the second (of two) DNS addresses that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

dhcp6_pd_server_range_subnet_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The prefix value used to subnet the addresses specified in the address pool. Thisis the subnet prefix length advertised in DHCPv6PD Offer and Reply messages.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The prefix value used to subnet the addresses specified in the address pool. This is the subnet prefix length advertised in DHCPv6PD Offer and Reply messages.

DEFAULT

 None

dhcp6_pd_server_range_start_pool_address

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The starting IPv6 address for this DHCPv6 address pool.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The starting IPv6 address for this DHCPv6 address pool.

DEFAULT

 None

dhcp6_pgdata_max_outstanding_requests

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

20

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

20

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_setup_rate' | value= '1' |

dhcp6_pgdata_override_global_setup_rate

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pgdata_setup_rate_initial

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_setup_rate' | value= '1' |

dhcp6_pgdata_setup_rate_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'.

DEFAULT

0

dhcp6_pgdata_setup_rate_max

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

10

dhcp6_pgdata_max_outstanding_releases

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

500

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_teardown_rate' | value= '1' |

dhcp6_pgdata_override_global_teardown_rate

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pgdata_teardown_rate_initial

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Description This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

50

IxNetwork-NGPF

DESCRIPTION

Description This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

50

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_teardown_rate' | value= '1' |

dhcp6_pgdata_teardown_rate_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

50

dhcp6_pgdata_teardown_rate_max

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

500

hosts_range_ip_outer_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter represents the address prefix allocated to the hosts in all of the subnets behind the CPE interface. The default prefix is 64, the minimum is 0, and the maximum is 128.

DEFAULT

64

hosts_range_ip_prefix_addr

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 prefix to be used for the static host addresses. The default prefix is 3001.

DEFAULT

 None

hosts_range_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Configures the DHCP Hosts Range count property. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

 None

hosts_range_eui_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter configures the EUI step to increment 'hosts_range_first_eui ' from the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter hosts_range_count greater than 1

DEFAULT

 None

hosts_range_first_eui

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Configures the first EUI value of the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

 None

hosts_range_ip_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Defines the network prefix length associated with the address pool for the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

 None

hosts_range_subnet_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

It defines the number of subnets for the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

 None

lease_time_max

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The maximum lease duration, in seconds. The default value is 86,400; the minimum is 300; and the maximum is 30,000,000.

DEFAULT

 None

lease_time

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The duration of an address lease, in seconds, if the client requesting the lease does not ask for a specific expiration time. The default value is 3600; the minimum is 300; and the maximum is 30,000,000.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The duration of an address lease, in seconds, if the client requesting the lease does not ask for a specific expiration time. The default value is 3600; the minimum is 300; and the maximum is 30,000,000.

DEFAULT

3600

padi_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADI message.

DEFAULT

 None

pado_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADO message.

DEFAULT

 None

padr_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADR message.

DEFAULT

 None

pads_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADS message.

DEFAULT

 None

re_connect_on_link_up

Supported platforms Details

group_ip_count

Supported platforms Details

group_ip_step

Supported platforms Details

start_group_ip

Supported platforms Details

igmp_version

Supported platforms Details

is_last_subport

Supported platforms Details

join_leaves_per_second

Supported platforms Details

l4_src_port

Supported platforms Details

l4_dst_port

Supported platforms Details

l4_flow_number

Supported platforms Details

l4_flow_type

Supported platforms Details

l4_flow_variant

Supported platforms Details

mc_enable_general_query

Supported platforms Details

mc_enable_group_specific_query

Supported platforms Details

mc_enable_immediate_response

Supported platforms Details

mc_enable_packing

Supported platforms Details

mc_enable_router_alert

Supported platforms Details

mc_enable_suppress_reports

Supported platforms Details

mc_enable_unsolicited

Supported platforms Details

mc_group_id

Supported platforms Details

mc_report_frequency

Supported platforms Details

ppp_local_mode

Supported platforms Details

ppp_peer_mode

Supported platforms Details

enable_delete_config

Supported platforms Details

flap_repeat_count

Supported platforms Details

flap_rate

Supported platforms Details

switch_duration

Supported platforms Details

watch_duration

Supported platforms Details

hold_time

Supported platforms Details

cool_off_time

Supported platforms Details

dut_assigned_src_addr

Supported platforms Details

include_id

Supported platforms Details

sessions_per_vc

Supported platforms Details

enable_host_uniq

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enables PPPoE Host-Uniq tag

DEFAULT

 None

host_uniq

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Host-Uniq

DEFAULT

 None

multiplier

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

number of layer instances per parent instance (multiplier)

DEFAULT

 None

RETURN VALUES

Supported Platform Details

IxNetwork-NGPF

pppox_client_handle

A list containing the pppox client protocol stack handles that were added by the command (if any).

pppox_server_handle

A list containing the pppox server protocol stack handles that were added by the command (if any).

pppox_server_sessions_handle

A list containing the pppox server sessions protocol stack handles that were added by the command (if any).

dhcpv6_client_handle

A list containing the dhcpv6 client protocol stack handles that were added by the command (if any).

dhcpv6_server_handle

A list containing the dhcpv6 server protocol stack handles that were added by the command (if any).

handle

A list containing individual interface, session and/or router handles that were added by the command (if any). Please note that this key will be omitted if the current session or command were run with -return_detailed_handles 0.

IxNetwork-NGPF and IxNetwork and IxOS/IxNetwork-FT

status

$::SUCCESS | $::FAILURE

handles

ppp handles

log

When status is failure, contains more information

EXAMPLES

IxNetwork and IxOS/IxNetwork-FT

See the PPPoE examples in Appendix A, "Example APIs," for specific examples of usage.

SAMPLE INPUT

SAMPLE OUTPUT

NOTES

IxNetwork-NGPF

1) Coded versus functional specification. 2) When -handle is provided with the /globals value the arguments that configure global protocol setting accept both multivalue handles and simple values. When -handle is provided with a a protocol stack handle or a protocol session handle, the arguments that configure global settings will only accept simple values. In this situation, these arguments will configure only the settings of the parent device group or the ports associated with the parent topology. If the current session or command was run with -return_detailed_handles 0 the following keys will be omitted from the command response: handle

IxNetwork and IxOS/IxNetwork-FT

1) Coded versus functional specification.

PYTHON

NAME - ::<namespace>:: pppox_config

Synopsis | Arguments | Return values | Examples | Sample input | Sample output | Notes

The following table lists the platforms that support the pppox_config command.

Command IxOS/IxNetwork-FT IxNetwork IxNetwork-NGPF

::<namespace>:: pppox_config

Python API

Scriptgen

Python API

Scriptgen

Python API

Scriptgen

No

No

No

No

Yes

Yes

NAME - <namespace>::pppox_config

DESCRIPTION

IxNetwork, IxOS/IxNetwork-FT

This procedure configures PPPoA, PPPoEoA, PPPoE sessions for the specified test port. This command allows the user to configure a specified number of PPPoX sessions on the test port. Each port can have upto 32000 sessions.

IxNetwork-NGPF

This procedure configures PPPoA, PPPoEoA, PPPoE sessions for the specified test port. This command allows the user to configure a specified number of PPPoX sessions on the test port. Each port can have upto 32000 sessions.

SYNOPSIS - ::<namespace>::pppox_config

List arguments in the alphabetical order or in the reverse alphabetical order.

Arguments

IxOS/IxNetwork-FT

IxNetwork

IxNetwork-NGPF

IxLoad

[port_role

CHOICES access network

CHOICES access network

CHOICES access network

-

]

[handle

-

ANY

ANY

-

]

[protocol_name

-

-

ALPHA

-

]

[unlimited_redial_attempts

-

-

CHOICES 0 1

-

]

[enable_mru_negotiation

-

CHOICES 0 1

CHOICES 0 1

-

]

[desired_mru_rate

-

NUMERIC

NUMERIC

-

]

[max_payload

-

NUMERIC

NUMERIC

-

]

[enable_max_payload

-

CHOICES 0 1

CHOICES 0 1

-

]

[client_ipv6_ncp_configuration

-

-

CHOICES learned request

-

]

[client_ipv4_ncp_configuration

-

-

CHOICES learned request

-

]

[server_ipv6_ncp_configuration

-

-

CHOICES clientmay serveronly

-

]

[server_ipv4_ncp_configuration

-

-

CHOICES clientmay serveronly

-

]

[lcp_enable_accm

-

-

CHOICES 0 1

-

]

[lcp_accm

-

-

ANY

-

]

[num_sessions

RANGE 1 - 32000

RANGE 1 - 32000

RANGE 1 - 32000

-

]

[ac_select_mode

CHOICES first_responding ac_mac ac_name service_name

CHOICES first_responding ac_mac ac_name service_name

CHOICES first_responding ac_mac ac_name

-

]

[ac_match_name

-

-

ALPHA

-

]

[ac_match_mac

-

-

ALPHA

-

]

[auth_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[config_req_timeout

RANGE 1 - 120

RANGE 1 - 120

RANGE 1 - 120

-

]

[echo_req

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[echo_rsp

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[ip_cp

CHOICES ipv4_cp ipv6_cp dual_stack

CHOICES ipv4_cp ipv6_cp dual_stack

CHOICES ipv4_cp ipv6_cp dual_stack

-

]

[ipcp_req_timeout

RANGE 1 - 120

RANGE 1 - 120

RANGE 1 - 120

-

]

[max_auth_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[max_padi_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[max_padr_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[max_terminate_req

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 0 - 65535

-

]

[padi_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[padr_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[password

ANY

ANY

ALPHA

-

]

[chap_secret

-

-

ALPHA

-

]

[username

ANY

ANY

ALPHA

-

]

[chap_name

-

-

ALPHA

-

]

[vlan_id

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4095

-

]

[vlan_id_count

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 1 - 4094

-

]

[vlan_id_step

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4094

-

]

[vlan_user_priority

RANGE 0 - 7

RANGE 0 - 7

RANGE 0 - 7

-

]

[vlan_user_priority_step

-

-

RANGE 1 - 7

-

]

[vlan_user_priority_outer

RANGE 0 - 7

RANGE 0 - 7

RANGE 0 - 7

-

]

[mode

CHOICES add remove modify

CHOICES add remove modify

CHOICES add remove modify

-

]

[auth_mode

CHOICES none pap chap pap_or_chap

CHOICES none pap chap pap_or_chap

CHOICES none pap chap pap_or_chap

-

]

[echo_req_interval

-

RANGE 1 - 3600

RANGE 1 - 3600

-

]

[mac_addr

MAC

MAC

MAC

-

]

[mac_addr_step

-

MAC

MAC

-

]

[max_configure_req

-

RANGE 1 - 255

RANGE 1 - 255

-

]

[max_ipcp_req

-

RANGE 1 - 255

RANGE 1 - 255

-

]

[ac_name

ANY

ANY

ALPHA

-

]

[actual_rate_downstream

-

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[actual_rate_upstream

-

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[agent_circuit_id

ANY

ANY

ALPHA

-

]

[agent_remote_id

ANY

ANY

ALPHA

-

]

[data_link

-

CHOICES atm_aal5 ethernet

CHOICES atm_aal5 ethernet

-

]

[enable_domain_group_map

-

-

CHOICES 0 1

-

]

[domain_group_map

ANY

ANY

ALPHA

-

]

[enable_client_signal_iwf

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_client_signal_loop_char

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_client_signal_loop_encap

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_client_signal_loop_id

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_server_signal_iwf

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_server_signal_loop_char

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_server_signal_loop_encap

-

CHOICES 0 1

CHOICES 0 1

-

]

[enable_server_signal_loop_id

-

CHOICES 0 1

CHOICES 0 1

-

]

[intermediate_agent

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[intermediate_agent_encap1

-

CHOICES na untagged_eth single_tagged_eth

CHOICES na untagged_eth single_tagged_eth

-

]

[intermediate_agent_encap2

-

CHOICES na pppoa_llc pppoa_null ipoa_llc ipoa_null eth_aal5_llc_fcs eth_aal5_llc_no_fcs eth_aal5_null_fcs eth_aal5_null_no_fcs

CHOICES na pppoa_llc pppoa_null ipoa_llc ipoa_null eth_aal5_llc_fcs eth_aal5_llc_no_fcs eth_aal5_null_fcs eth_aal5_null_no_fcs

-

]

[ipv6_global_address_mode

CHOICES icmpv6 dhcpv6_pd

CHOICES icmpv6 dhcpv6_pd

CHOICES icmpv6 dhcpv6_pd

-

]

[ipv6_pool_prefix_len

NUMERIC

NUMERIC

NUMERIC

-

]

[ipv6_pool_prefix

ANY

ANY

IPV6

-

]

[ipv6_pool_addr_prefix_len

NUMERIC

NUMERIC

NUMERIC

-

]

[ppp_local_iid

ANY

ANY

IPV6

-

]

[ppp_local_ip

IPV4

IPV4

IPV4

-

]

[ppp_local_ip_step

IPV4

IPV4

IPV4

-

]

[ppp_local_iid_step

-

-

NUMERIC

-

]

[ppp_peer_iid

ANY

ANY

IPV6

-

]

[ppp_peer_iid_step

-

-

NUMERIC

-

]

[ppp_peer_ip

IPV4

IPV4

IPV4

-

]

[ppp_peer_ip_step

IPV4

IPV4

IPV4

-

]

[redial

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[redial_max

-

RANGE 1 - 255

RANGE 1 - 255

-

]

[redial_timeout

-

RANGE 1 - 65535

RANGE 1 - 65535

-

]

[service_name

ANY

ANY

ALPHA

-

]

[service_type

-

-

CHOICES any name

-

]

[send_dns_options

-

-

CHOICES 0 1

-

]

[dns_server_list

-

-

ANY

-

]

[client_dns_options

-

-

CHOICES request_primary_and_secondary request_primary_only accept_addresses_from_server accept_only_primary_address_from_server disable_extension

-

]

[client_dns_primary_address

-

-

IPV4

-

]

[client_dns_secondary_address

-

-

IPV4

-

]

[client_netmask_options

-

-

CHOICES disable_extension request request_specific_netmask accept_netmask_from_server

-

]

[client_netmask

-

-

IPV4

-

]

[client_wins_options

-

-

CHOICES disable_extension request_primaryonly_wins request_primaryandsecondary_wins accept_addresses_from_server accept_only_primary_address_from_server

-

]

[client_wins_primary_address

-

-

IPV4

-

]

[client_wins_secondary_address

-

-

IPV4

-

]

[server_dns_options

-

-

CHOICES accept_requested_addresses accept_only_requested_primary_address supply_primary_and_secondary supply_primary_only disable_extension

-

]

[server_dns_primary_address

-

-

IPV4

-

]

[server_dns_secondary_address

-

-

IPV4

-

]

[server_netmask_options

-

-

CHOICES disable_extension request accept_requested_netmask supply_netmask

-

]

[server_netmask

-

-

IPV4

-

]

[server_wins_options

-

-

CHOICES disable_extension accept_requested_addresses accept_only_requested_primary_address supply_primary_and_secondary supply_primary_only

-

]

[server_wins_primary_address

-

-

IPV4

-

]

[server_wins_secondary_address

-

-

IPV4

-

]

[ra_timeout

-

-

NUMERIC

-

]

[create_interfaces

-

-

CHOICES 0 1

-

]

[attempt_rate

-

RANGE 1 - 1000

RANGE 1 - 1000

-

]

[attempt_max_outstanding

-

-

RANGE 1 - 1000

-

]

[attempt_interval

-

-

NUMERIC

-

]

[attempt_enabled

-

-

CHOICES 0 1

-

]

[attempt_scale_mode

-

-

CHOICES port device_group

-

]

[disconnect_rate

RANGE 1 - 1000

RANGE 1 - 1000

RANGE 1 - 1000

-

]

[disconnect_max_outstanding

-

-

RANGE 1 - 1000

-

]

[disconnect_interval

-

-

NUMERIC

-

]

[disconnect_enabled

-

-

CHOICES 0 1

-

]

[disconnect_scale_mode

-

-

CHOICES port device_group

-

]

[enable_session_lifetime

-

-

CHOICES 0 1

-

]

[min_lifetime

-

-

NUMERIC

-

]

[max_lifetime

-

-

NUMERIC

-

]

[enable_session_lifetime_restart

-

-

CHOICES 0 1

-

]

[max_session_lifetime_restarts

-

-

NUMERIC

-

]

[unlimited_session_lifetime_restarts

-

-

CHOICES 0 1

-

]

[accept_any_auth_value

-

-

CHOICES 0 1

-

]

[port_handle

-

interface

REGEXP ^[0-9]+/[0-9]+/[0-9]+$

-

]

[protocol

-

CHOICES pppoa pppoeoa pppoe

CHOICES pppoe pppoeoa pppoa

-

]

[vci

RANGE 1 - 65535

RANGE 1 - 65535

-

-

]

[vci_step

RANGE 1 - 65534

RANGE 1 - 65534

-

-

]

[vci_count

-

RANGE 1 - 65504

-

-

]

[addr_count_per_vci

-

RANGE 1 - 65535

-

-

]

[vpi

RANGE 0 - 255

RANGE 0 - 255

-

-

]

[vpi_step

RANGE 1 - 255

RANGE 1 - 255

-

-

]

[vpi_count

RANGE 1 - 256

RANGE 1 - 256

-

-

]

[addr_count_per_vpi

-

RANGE 1 - 65535

-

-

]

[pvc_incr_mode

CHOICES vpi vci both

CHOICES vpi vci both

-

-

]

[encap

-

CHOICES ethernet_ii ethernet_ii_vlan ethernet_ii_qinq vc_mux vc_mux_routed vc_mux_nofcs llcsnap llcsnap_routed llcsnap_nofcs

CHOICES ethernet_ii ethernet_ii_vlan ethernet_ii_qinq vc_mux vc_mux_routed vc_mux_nofcs llcsnap llcsnap_routed llcsnap_nofcs

-

]

[address_per_vlan

RANGE 1 - 1000000000

RANGE 1 - 1000000000

RANGE 1 - 1000000000

-

]

[address_per_svlan

RANGE 1 - 1000000000

RANGE 1 - 1000000000

RANGE 1 - 1000000000

-

]

[qinq_incr_mode

CHOICES inner outer both

CHOICES inner outer both

CHOICES inner outer both

-

]

[vlan_id_outer

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4095

-

]

[vlan_id_outer_count

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 1 - 4094

-

]

[vlan_id_outer_step

RANGE 0 - 4094

RANGE 0 - 4094

RANGE 0 - 4094

-

]

[vlan_user_priority_count

-

-

-

-

]

[password_wildcard

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[username_wildcard

RANGE 0 - 1

RANGE 0 - 1

CHOICES 0 1

-

]

[wildcard_pound_start

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[wildcard_pound_end

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[wildcard_question_start

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[wildcard_question_end

REGEXP ^[0-9]{1,5}$

REGEXP ^[0-9]{1,5}$

NUMERIC

-

]

[ac_select_list

KEYLIST

KEYLIST

ANY

-

]

[enable_throttling

-

-

-

-

]

[enable_setup_throttling

-

-

-

-

]

[enable_multicast

-

-

-

-

]

[local_magic

RANGE 0 - 1

RANGE 0 - 1

-

-

]

[term_req_timeout

RANGE 1 - 65535

RANGE 1 - 65535

-

-

]

[lcp_max_failure

-

-

NUMERIC

-

]

[max_outstanding

-

RANGE 1 - 1000

RANGE 1 - 1000

-

]

[dhcpv6_hosts_enable

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[dhcp6_global_echo_ia_info

-

CHOICES 0 1

CHOICES 0 1

-

]

[dhcp6_global_max_outstanding_releases

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[dhcp6_global_max_outstanding_requests

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[dhcp6_global_reb_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[dhcp6_global_reb_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_rel_max_rc

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_rel_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_ren_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[dhcp6_global_ren_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_req_max_rc

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_req_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[dhcp6_global_req_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_setup_rate_initial

-

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[dhcp6_global_setup_rate_increment

-

RANGE - 10000

-

-

]

[dhcp6_global_setup_rate_max

-

RANGE 1 - 100000

-

-

]

[dhcp6_global_sol_max_rc

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_sol_max_rt

-

RANGE 1 - 10000

RANGE 1 - 10000

-

]

[dhcp6_global_sol_timeout

-

RANGE 1 - 100

RANGE 1 - 100

-

]

[dhcp6_global_teardown_rate_initial

-

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[dhcp6_global_teardown_rate_increment

-

RANGE - 10000

-

-

]

[dhcp6_global_teardown_rate_max

-

RANGE 1 - 100000

-

-

]

[dhcp6_global_wait_for_completion

-

CHOICES 0 1

-

-

]

[dhcpv6pd_type

CHOICES client server

CHOICES client server

CHOICES client server

-

]

[dhcp6_pd_client_range_duid_enterprise_id

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[dhcp6_pd_client_range_duid_type

CHOICES duid_en duid_llt duid_ll

CHOICES duid_en duid_llt duid_ll

CHOICES duid_en duid_llt duid_ll

-

]

[dhcp6_pd_client_range_duid_vendor_id

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[dhcp6_pd_client_range_duid_vendor_id_increment

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[dhcp6_pd_client_range_ia_id

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[dhcp6_pd_client_range_ia_id_increment

RANGE 1 - 2147483647

RANGE 1 - 2147483647

RANGE 1 - 2147483647

-

]

[dhcp6_pd_client_range_ia_t1

RANGE 0 - 2147483647

RANGE 0 - 2147483647

RANGE 0 - 2147483647

-

]

[dhcp6_pd_client_range_ia_t2

RANGE 0 - 2147483647

RANGE 0 - 2147483647

RANGE 0 - 2147483647

-

]

[dhcp6_pd_client_range_ia_type

CHOICES iapd

CHOICES iapd

CHOICES iapd iana iata iana_iapd

-

]

[dhcp6_pd_client_range_param_request_list

NUMERIC

NUMERIC

-

-

]

[dhcp6_pd_client_range_renew_timer

RANGE 0 - 1000000000

RANGE 0 - 1000000000

RANGE 0 - 1000000000

-

]

[dhcp6_pd_client_range_use_vendor_class_id

CHOICES 0 1

CHOICES 0 1

-

-

]

[dhcp6_pd_client_range_vendor_class_id

ANY

ANY

-

-

]

[dhcp6_pd_server_range_dns_domain_search_list

ANY

ANY

ANY

-

]

[dhcp6_pd_server_range_first_dns_server

IP

IP

IP

-

]

[dhcp6_pd_server_range_second_dns_server

IP

IP

IP

-

]

[dhcp6_pd_server_range_subnet_prefix

NUMERIC

NUMERIC

NUMERIC

-

]

[dhcp6_pd_server_range_start_pool_address

IP

IP

IP

-

]

[dhcp6_pgdata_max_outstanding_requests

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[dhcp6_pgdata_override_global_setup_rate

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[dhcp6_pgdata_setup_rate_initial

RANGE 1 - 100000

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[dhcp6_pgdata_setup_rate_increment

RANGE 0 - 100000

RANGE 0 - 100000

-

-

]

[dhcp6_pgdata_setup_rate_max

RANGE 1 - 100000

RANGE 1 - 100000

-

-

]

[dhcp6_pgdata_max_outstanding_releases

-

RANGE 1 - 100000

RANGE 1 - 100000

-

]

[dhcp6_pgdata_override_global_teardown_rate

CHOICES 0 1

CHOICES 0 1

CHOICES 0 1

-

]

[dhcp6_pgdata_teardown_rate_initial

RANGE 1 - 100000

RANGE 1 - 100000

RANGE 1 - 10000

-

]

[dhcp6_pgdata_teardown_rate_increment

RANGE 0 - 100000

RANGE 0 - 100000

-

-

]

[dhcp6_pgdata_teardown_rate_max

RANGE 1 - 100000

RANGE 1 - 100000

-

-

]

[hosts_range_ip_outer_prefix

NUMERIC

NUMERIC

-

-

]

[hosts_range_ip_prefix_addr

IP

IP

-

-

]

[hosts_range_count

RANGE 1 - 1000000

RANGE 1 - 1000000

-

-

]

[hosts_range_eui_increment

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

-

-

]

[hosts_range_first_eui

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

REGEXP ^([A-Fa-f0-9]{2,2}[ .:)]{7,7}([A-Fa-f0-9]{2,2})$

-

-

]

[hosts_range_ip_prefix

RANGE 64 - 128

RANGE 64 - 128

-

-

]

[hosts_range_subnet_count

RANGE 1 - 32

RANGE 1 - 32

-

-

]

[lease_time_max

RANGE 300 - 30000000

RANGE 300 - 30000000

-

-

]

[lease_time

RANGE 300 - 30000000

RANGE 300 - 30000000

RANGE 300 - 30000000

-

]

[padi_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[pado_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[padr_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[pads_include_tag

CHOICES 0 1

CHOICES 0 1

-

-

]

[re_connect_on_link_up

-

-

-

-

]

[group_ip_count

-

-

-

-

]

[group_ip_step

-

-

-

-

]

[start_group_ip

-

-

-

-

]

[igmp_version

-

-

-

-

]

[is_last_subport

-

-

-

-

]

[join_leaves_per_second

-

-

-

-

]

[l4_src_port

-

-

-

-

]

[l4_dst_port

-

-

-

-

]

[l4_flow_number

-

-

-

-

]

[l4_flow_type

-

-

-

-

]

[l4_flow_variant

-

-

-

-

]

[mc_enable_general_query

-

-

-

-

]

[mc_enable_group_specific_query

-

-

-

-

]

[mc_enable_immediate_response

-

-

-

-

]

[mc_enable_packing

-

-

-

-

]

[mc_enable_router_alert

-

-

-

-

]

[mc_enable_suppress_reports

-

-

-

-

]

[mc_enable_unsolicited

-

-

-

-

]

[mc_group_id

-

-

-

-

]

[mc_report_frequency

-

-

-

-

]

[ppp_local_mode

-

-

-

-

]

[ppp_peer_mode

-

-

-

-

]

[enable_delete_config

-

-

-

-

]

[flap_repeat_count

-

-

-

-

]

[flap_rate

-

-

-

-

]

[switch_duration

-

-

-

-

]

[watch_duration

-

-

-

-

]

[hold_time

-

-

-

-

]

[cool_off_time

-

-

-

-

]

[dut_assigned_src_addr

-

-

-

-

]

[include_id

-

-

-

-

]

[sessions_per_vc

-

-

-

-

]

[enable_host_uniq

-

-

ANY

-

]

[host_uniq

-

-

ANY

-

]

[multiplier

-

-

NUMERIC

-

]

ARGUMENTS

[M] indicates if the argument is mandatory on the supported platform.

port_role

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The role of the port in the test: access or network.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The role of the port in the test: access or network.

Valid options are:

access

is PPPoX client

network

is PPPoX server

DEFAULT

 None

handle

Supported platforms Details

IxNetwork

DESCRIPTION

PPPoX handle of a configuration to be modified or removed.Dependencies: only available when IxNetwork is used for the PPPoX configuration.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

PPPoX handle of a configuration to be modified or removed. Dependencies: only available when IxNetwork is used for the PPPoX configuration. When -handle is provided with the /globals value the arguments that configure global protocol setting accept both multivalue handles and simple values. When -handle is provided with a a protocol stack handle or a protocol session handle, the arguments that configure global settings will only accept simple values. In this situation, these arguments will configure only the settings of the parent device group or the ports associated with the parent topology.

DEFAULT

 None

protocol_name

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

unlimited_redial_attempts

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

If checked, PPPoE unlimited redial attempts is enabled

DEFAULT

 None

enable_mru_negotiation

Supported platforms Details

IxNetwork

DESCRIPTION

Enables the MRU Negotiation.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enable MRU Negotiation

DEFAULT

 None

desired_mru_rate

Supported platforms Details

IxNetwork

DESCRIPTION

Max Transmit Unit for PPP.

DEFAULT

1492

IxNetwork-NGPF

DESCRIPTION

Max Transmit Unit for PPP

DEFAULT

 None

max_payload

Supported platforms Details

IxNetwork

DESCRIPTION

Max Payload. Valid only when enable_max_payload is enabled.

DEFAULT

1492

IxNetwork-NGPF

DESCRIPTION

Max Payload. Valid only when enable_max_payload is enabled.

DEFAULT

 None

enable_max_payload

Supported platforms Details

IxNetwork

DESCRIPTION

Enables PPP Max Payload tag.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables PPP Max Payload tag

DEFAULT

 None

client_ipv6_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv6_cp or dual_stack

Valid options are:

learned

request

DEFAULT

learned

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

client_ipv4_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv4_cp or dual_stack

Valid options are:

learned

request

DEFAULT

learned

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

server_ipv6_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv6_cp or dual_stack

Valid options are:

clientmay

serveronly

DEFAULT

clientmay

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

server_ipv4_ncp_configuration

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when ip_cp is ipv4_cp or dual_stack

Valid options are:

clientmay

serveronly

DEFAULT

clientmay

DEPENDENCIES

Valid in combination with parameter(s)
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

lcp_enable_accm

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable Async-Control-Character-Map

DEFAULT

 None

lcp_accm

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Async-Control-Character-Map. Valid only when lcp_enable_accm is enabled.

DEFAULT

 None

num_sessions

Supported platforms Details

IxNetwork [M] , IxOS/IxNetwork-FT [M]

DESCRIPTION

PPP sessions to configure, applies to PPPoEoE and PPPoEoA only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The number of PPP sessions to configure. For PPP servers this will configure the number of sessions supprted by each server. For PPP clients this will configure the number of client sessions that are available.

DEFAULT

 None

ac_select_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

There are various ways AC can be selected based on the PADO first_responding - (DEFAULT)ac_mac - Specify the AC MAC Address and percentage pair using -ac_select_list.ac_name - Specify the AC Name and percentage pair using -ac_select_list option.service_name

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

There are various ways AC can be selected based on the PADO received from AC.

Valid options are:

first_responding

(DEFAULT)

ac_mac

Specify the AC MAC Address and percentage pair using -ac_select_list.

ac_name

Specify the AC Name and percentage pair using -ac_select_list option.

DEFAULT

first_responding

ac_match_name

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

ac_match_mac

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

auth_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an authentication Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an authentication Request.

DEFAULT

5

config_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a Configure Request or Terminate Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a Configure Request or Terminate Request.

DEFAULT

5

echo_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When set to 1, enables Echo Requests, when set to 0, disables Echo Requests.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When set to 1, enables Echo Requests, when set to 0, disables Echo Requests.

DEFAULT

0

echo_rsp

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

0 - Disable sending of the echo Responses.1 - (DEFAULT) Enable Echo Replies.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This can be used to do negative testing. Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration). Valid choices are: 0 - Disable sending of the echo Responses. 1 - (DEFAULT) Enable Echo Replies.

DEFAULT

1

ip_cp

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Not defined

Valid options are:

ipv4_cp

IPv4 Control Protocol. When dhcpv6_hosts_enable is 1 a PPPoX IPv4

ipv6_cp

IPv6 Control Protocol. When dhcpv6_hosts_enable is 1 a DHCPv6 behind

dual_stack

Valid only when dhcpv6_hosts_enable is 1. A dual stack DHCPv6 behind

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

ipv4_cp

IPv4 Control Protocol. When dhcpv6_hosts_enable is 1 a PPPoX IPv4 range will be created that can coexist with other ranges from the same port created with dhcpv6_hosts_enable 1. An error will be issued if dhcpv6_hosts_enable is 0 and other ranges created with dhcpv6_hosts_enable 1 exist on the same port.

ipv6_cp

IPv6 Control Protocol. When dhcpv6_hosts_enable is 1 a DHCPv6 behind PPP CPE range will be created. An error will be issued if dhcpv6_hosts_enable is 0 and other ranges created with dhcpv6_hosts_enable 1 exist on the same port.

dual_stack

Valid only when dhcpv6_hosts_enable is 1. A dual stack DHCPv6 behind PPP CPE range will be created. An error will be issued if other ranges created with dhcpv6_hosts_enable 0 exist on the same port.

DEFAULT

ipv4_cp

ipcp_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an IPCP configure request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of an IPCP configure request.

DEFAULT

5

max_auth_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of Authentication Requests that can be sent without getting an authentication response from the DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of Authentication Requests that can be sent without getting an authentication response from the DUT.

DEFAULT

10

max_padi_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of PADI Requests that can be sent without getting a PADO from the DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of PADI Requests that can be sent without getting a PADO from the DUT.

DEFAULT

10

max_padr_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of PADR Requests that can be sent without getting a PADS from the DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of PADR Requests that can be sent without getting a PADS from the DUT.

DEFAULT

10

max_terminate_req

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the maximum number of Terminate Requests that can be sent without acknowledgement.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of Terminate Requests that can be sent without acknowledgement.

DEFAULT

10

padi_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADI Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADI Request.

DEFAULT

5

padr_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADR Request.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a PADR Request.

DEFAULT

5

password

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Password, PAP and CHAP only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Password, PAP and CHAP only.

DEFAULT

 None

chap_secret

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Secret when CHAP Authentication is being used

DEFAULT

 None

username

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Username, PAP and CHAP only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Username, PAP and CHAP only.

DEFAULT

 None

chap_name

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

User name when CHAP Authentication is being used

DEFAULT

 None

vlan_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting VLAN ID, applies to PPPoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting VLAN ID, applies to PPPoE w/VLAN only.

DEFAULT

1

vlan_id_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Number of VLAN IDs, applies to PPPoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Number of VLAN IDs, applies to PPPoE w/VLAN only.

DEFAULT

4094

vlan_id_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to VLAN ID, PPPoEoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Step value applied to VLAN ID, PPPoEoE w/VLAN only.

DEFAULT

1

vlan_user_priority

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

0

vlan_user_priority_step

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

1

vlan_user_priority_outer

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Outer VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Outer VLAN user priority, PPPoEoE w/VLAN only.

DEFAULT

0

mode

Supported platforms Details

IxNetwork [M] , IxOS/IxNetwork-FT [M]

DESCRIPTION

Add - add a new PPPoX configurationModify - modify an existing PPPoX configuration (specified by -handle)Remove - Remove an existing PPPoX configuration (specified by -handle)

DEFAULT

 None

IxNetwork-NGPF [M]

DESCRIPTION

Dependencies: only available when IxNetwork is used for the PPPoX configuration.

Valid options are:

add

add a new PPPoX configuration

remove

Remove an existing PPPoX configuration (specified by -handle)

modify

modify an existing PPPoX configuration (specified by -handle)

DEFAULT

 None

auth_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

none - (DEFAULT)papchappap_or_chap - Accept both PAP and CHAP offered by DUT.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Authentication mode.

Valid options are:

none

(DEFAULT)

pap

chap

pap_or_chap

Accept both PAP and CHAP offered by DUT.

DEFAULT

 None

echo_req_interval

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the time interval in seconds for sending LCP echo requests. Valid only if -echo_req is set to 1. When using IxNetwork this parameter can take values from the 1-3600 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the time interval in seconds for sending LCP echo requests. Valid only if -echo_req is set to 1. When using IxNetwork this parameter can take values from the 1-3600 range.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'echo_req' | value= '1' |

mac_addr

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

DEFAULT

 None

mac_addr_step

Supported platforms Details

IxNetwork

DESCRIPTION

Dependencies: -mode add or modify (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Dependencies: -mode add or modify (when IxNetwork is used for the PPPoX configuration).

DEFAULT

0000.0000.0001

max_configure_req

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the maximum number of LCP Configure Requests that can be sent without acknowledgement. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of LCP Configure Requests that can be sent without acknowledgement. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

max_ipcp_req

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the maximum number of IPCP configure requests that can be sent without getting an ack from the DUT. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of IPCP configure requests that can be sent without getting an ack from the DUT. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

ac_name

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When the port is used as a server, this is the name sent in the PADO message.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When the port is used as a server, this is the name sent in the PADO message.

DEFAULT

 None

actual_rate_downstream

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual downstream data rate (sub-option 0x81), in kbps. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual downstream data rate (sub-option 0x81), in kbps. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

actual_rate_upstream

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual upstream data rate (sub-option 0x82), in kbps Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. The actual upstream data rate (sub-option 0x82), in kbps Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

agent_circuit_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters.The agent_circuit_id field is defined in strings of the form:%::i.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters.The agent_circuit_id field is defined in strings of the form: %::i.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

agent_remote_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters. The agentRemoteId field is defined in strings of the form:%::i.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When intermediate_agent is true, the program inserts an Agent Circuit ID and an Agent Remote ID into PPPoE tags for each PPPoE session. These IDs serve to distinguish the CPE premises from each other. This field has a maximum length of 32 characters. The agentRemoteId field is defined in strings of the form: %::i.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

data_link

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the data-link protocol on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the data-link protocol on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

Valid options are:

atm_aal5

ethernet

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

enable_domain_group_map

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

This parameter configures the Interworking function (IWF). For details refer to -enable_server_signal_iwf. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

domain_group_map

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

List of domain group to LNS IP mapping. Each domain group can have thousands of domains. With the help of domain group it is very easy to map thousands of domains to one or more LNS IP addresses. Each domain group is defined as: { { domain_name } {lnsIP1 lnsIP2} }.Where domain_name is defined as:name : name to be used for the domain(s).wc {1|0} : enables wildcard substitution in the name field. wc_start : starting value for wildcard symbol for the name (%) substitutionwc_end : ending value for wildcard symbol for the name (%) substitutionlnsIP : LNS IP address list to be used for this domain.Example: You want to set up 20 domains, out of which cisco1.com to cisco10.com going to 192.1.1.1 & 192.1.1.2 and cisco11.com to cisco20.com going to 192.1.2.1. Also assume number of sessions per tunnel is 5. Your domain group list will look like:{ { {domain%.com 1 1 10} {192.1.1.1 192.1.1.2} }{ {domain%.com 1 11 20} {192.1.2.1} } }Tunnel Allocation will look like this:Sessions 1-5, tunnel1 dst 192.1.1.1;Sessions 5-10, tunnel2 dst 192.1.1.2;Sessions 11-15, tunnel3 dst 192.1.2.1;Sessions 16-20, tunnel4 dst 192.1.2.1.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

List of domain group to LNS IP mapping. Each domain group can have thousands of domains. With the help of domain group it is very easy to map thousands of domains to one or more LNS IP addresses. Each domain group is defined as: { { domain_name } {lnsIP1 lnsIP2} }. Where domain_name is defined as: {name wc wc_start wc_end } name : name to be used for the domain(s). wc {1|0} : enables wildcard substitution in the name field. wc_start : starting value for wildcard symbol for the name (%) substitution wc_end : ending value for wildcard symbol for the name (%) substitution lnsIP : LNS IP address list to be used for this domain. Example: You want to set up 20 domains, out of which cisco1.com to cisco10.com going to 192.1.1.1 & 192.1.1.2 and cisco11.com to cisco20.com going to 192.1.2.1. Also assume number of sessions per tunnel is 5. Your domain group list will look like: { { {cisco%.com 1 1 10} {192.1.1.1 192.1.1.2} } { {cisco%.com 1 11 20} {192.1.2.1} } } Tunnel Allocation will look like this: Sessions 1-5, tunnel1 dst 192.1.1.1; Sessions 5-10, tunnel2 dst 192.1.1.2; Sessions 11-15, tunnel3 dst 192.1.2.1; Sessions 16-20, tunnel4 dst 192.1.2.1.

DEFAULT

 None

enable_client_signal_iwf

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures the Interworking function (IWF). For details refer to -enable_server_signal_iwf. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures the Interworking function (IWF). For details refer to -enable_server_signal_iwf. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

enable_client_signal_loop_char

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics. For details refer to -enable_server_signal_loop_char. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

enable_client_signal_loop_encap

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encapWhen this parameter is enabled, the discovery packets will include the 0x90 sub-option.Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap When this parameter is enabled, the discovery packets will include the 0x90 sub-option. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

enable_client_signal_loop_id

Supported platforms Details

IxNetwork

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role access

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'access' |

enable_server_signal_iwf

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures the Interworking function (IWF) - When ATM is supported on the DSL line (the U interface), the Access Node must provide protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures the Interworking function (IWF) - When ATM is supported on the DSL line (the U interface), the Access Node must provide protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. When enabled, the Access Node provides protocol translation between the ATM layer on the user side and the Ethernet layer on the network side. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

enable_server_signal_loop_char

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Access Loop Characteristics - the Access Node reports the access loop sync rate and interleave delay to the Broadband Network Gateway (BNG). This allows the BNG to enable policy decisions and advanced QoS enforcement, while potentially taking full advantage of the data rate of a given access loop. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Access Loop Characteristics - the Access Node reports the access loop sync rate and interleave delay to the Broadband Network Gateway (BNG). This allows the BNG to enable policy decisions and advanced QoS enforcement, while potentially taking full advantage of the data rate of a given access loop. When this parameter is enabled, the discovery packets will include the 0x81 and 0x82 sub-options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

enable_server_signal_loop_encap

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90): for access loop encapsulation the PPPoE intermediate agent inserts information in the PPPoE packets to signal to the BNG the data-link protocol and the encapsulation overhead on the Access Loop. For signaling of interworked sessions the Access Node must signal the BNG that a given PPPoE session is going to carry interworked PPPoA traffic. When this parameter is enabled, the discovery packets will include the 0x90 sub-option. Available only when IxNetwork is used for PPPoX configurations.Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90): for access loop encapsulation the PPPoE intermediate agent inserts information in the PPPoE packets to signal to the BNG the data-link protocol and the encapsulation overhead on the Access Loop. For signaling of interworked sessions the Access Node must signal the BNG that a given PPPoE session is going to carry interworked PPPoA traffic. When this parameter is enabled, the discovery packets will include the 0x90 sub-option. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

enable_server_signal_loop_id

Supported platforms Details

IxNetwork

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

When this parameter is 1, the discovery packets will include the -agent_circuit_id and -agent_remote_id options. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1; -port_role network

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |
'port_role' | value= 'network' |

intermediate_agent

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables the Intermediate Agent feature. This feature allows for the testing of DSLAM/BRAS devices that translate from PPPoA traffic to PPPoE traffic. When this option is true, the program inserts agent_circuit_id and agent_remote_id values into PPPoE tags for each PPPoE session.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables the Intermediate Agent feature. This feature allows for the testing of DSLAM/BRAS devices that translate from PPPoA traffic to PPPoE traffic. When this option is true, the program inserts agent_circuit_id and agent_remote_id values into PPPoE tags for each PPPoE session.

DEFAULT

 None

intermediate_agent_encap1

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

Valid options are:

na

untagged_eth

single_tagged_eth

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

intermediate_agent_encap2

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations.Dependencies: -intermediate_agent 1

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This parameter configures Signaling the Access Loop Encapsulation (sub-option 0x90), for details refer to -enable_server_signal_loop_encap. The PPPoE intermediate agent on the Access Node inserts the 0x90 sub-option to signal to the BNG the encapsulation overhead on the Access Loop. Available only when IxNetwork is used for PPPoX configurations. Dependencies: -intermediate_agent 1

Valid options are:

na

pppoa_llc

pppoa_null

ipoa_llc

ipoa_null

eth_aal5_llc_fcs

eth_aal5_llc_no_fcs

eth_aal5_null_fcs

eth_aal5_null_no_fcs

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'intermediate_agent' | value= '1' |

ipv6_global_address_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Select the protocol used to set IPv6 global interfaces on PPP interfaces. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

Not defined

x

trigger

for each session, after completing

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Select the protocol used to set IPv6 global interfaces on PPP interfaces. This configuration applies at port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

icmpv6

(DEFAULT) IPv6 global address is fetched like before ' using ICMPV4 RA/RS messages.

dhcpv6_pd

PPP plugin will trigger - for each session, after completing the IPCPv6 phase ' the DHCPv6-PD port plugin to request a pool prefix and DNS server list. the IPv6 pool prefix will be used for both PPP-IPv6 interface global address and the DHCPv6 hosts behind the CPE.

DEFAULT

icmpv6

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

ipv6_pool_prefix_len

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 pool prefix length. Subtracting this from the address prefix length provides the size of the PPP IP pool.(DEFAULT 48)

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Pool prefix length. The difference between the address and pool prefix lengths determine the size of the IPv6 IP pool

DEFAULT

 None

ipv6_pool_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 pool prefix.(DEFAULT 0::)

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Pool prefix length. The difference between the address and pool prefix lengths determine the size of the IPv6 IP pool

DEFAULT

00 00 00 00 00 00 00 00

ipv6_pool_addr_prefix_len

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 address prefix length.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The IPv6 address prefix length.

DEFAULT

 None

ppp_local_iid

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The local base IPv6 interface ID.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The local base IPv6 interface ID.

DEFAULT

00 00 00 00 00 00 00 00

ppp_local_ip

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The first address assigned on the local PPP node.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The first address assigned on the local PPP node.

DEFAULT

2.2.2.2

ppp_local_ip_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The value by which ppp_local_ip is incremented for each session.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The value by which ppp_local_ip is incremented for each session.

DEFAULT

0.0.0.1

ppp_local_iid_step

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Server IPv6CP interface identifier increment, used in conjuction with the base identifier

DEFAULT

 None

ppp_peer_iid

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The peer base IPv6 interface ID.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The peer base IPv6 interface ID.

DEFAULT

00 00 00 00 00 00 00 00

ppp_peer_iid_step

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Client IPv6CP interface identifier increment, used in conjuction with the base identifier

DEFAULT

 None

ppp_peer_ip

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The first address assigned on the peer PPP node.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The first address assigned on the peer PPP node.

DEFAULT

1.1.1.1

ppp_peer_ip_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The value by which ppp_peer_ip is incremented for each session.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The value by which ppp_peer_ip is incremented for each session.

DEFAULT

 None

redial

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

If true, enables access ports to redial at the PPPoE level.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

If true, enables access ports to redial at the PPPoE level.

DEFAULT

1

redial_max

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of redial attempts. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The maximum number of redial attempts. When using IxNetwork this parameter can take values from the 1-255 range.

DEFAULT

20

redial_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

The time to wait before restarting a session if the call was dropped, expressed in seconds. When using IxNetwork this parameter can take values from the 1-65535 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The time to wait before restarting a session if the call was dropped, expressed in seconds. When using IxNetwork this parameter can take values from the 1-65535 range.

DEFAULT

10

service_name

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This string is used for matching of the PADO messages for the client. For server ports, this string is also sent by the server as the server name in the PADO message. Any string up to 32 characters in length may be used.The string may contain text characters, plus a specification of the form:%[::]i

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This string is used for matching of the PADO messages for the client. For server ports, this string is also sent by the server as the server name in the PADO message. Any string up to 32 characters in length may be used.The string may contain text characters, plus a specification of the form: %[::]i

DEFAULT

 None

service_type

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

The type of Access Concentrator matching that is desired.

Valid options are:

any

(DEFAULT) A service name is not required; a null service is sent during Discovery indicating to the access concentrator that the service is not specified.

name

Allows a matching service name to be configured in the service_name option.

DEFAULT

 None

send_dns_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable RDNSS routing advertisments

DEFAULT

 None

dns_server_list

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

DNS server list separacted by semicolon. Enabled just for IPv6 and send_dns_options.

DEFAULT

 None

client_dns_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

request_primary_and_secondary

request_primary_only

accept_addresses_from_server

accept_only_primary_address_from_server

disable_extension

DEFAULT

disable_extension

client_dns_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

client_dns_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

client_netmask_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

request

request_specific_netmask

accept_netmask_from_server

DEFAULT

disable_extension

client_netmask

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when client_netmask_options is request_specific_netmask

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'client_netmask_options' | value= 'request_specific_netmask' |

client_wins_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

request_primaryonly_wins

request_primaryandsecondary_wins

accept_addresses_from_server

accept_only_primary_address_from_server

DEFAULT

disable_extension

client_wins_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when client_wins_options is request_primaryonly_wins or accept_only_primary_address_from_server

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'client_wins_options' | value= 'accept_only_primary_address_from_server' |
'client_wins_options' | value= 'request_primaryonly_wins' |

client_wins_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when client_wins_options is request_primaryonly_wins

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'client_wins_options' | value= 'request_primaryonly_wins' |

server_dns_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

accept_requested_addresses

accept_only_requested_primary_address

supply_primary_and_secondary

supply_primary_only

disable_extension

DEFAULT

disable_extension

server_dns_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

server_dns_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

server_netmask_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

request

accept_requested_netmask

supply_netmask

DEFAULT

disable_extension

server_netmask

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid only when server_netmask_options is supply_netmask

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'server_netmask_options' | value= 'supply_netmask' |

server_wins_options

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

disable_extension

accept_requested_addresses

accept_only_requested_primary_address

supply_primary_and_secondary

supply_primary_only

DEFAULT

disable_extension

server_wins_primary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid when server_wins_options is supply_primary_and_secondary or supply_primary_only.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'server_wins_options' | value= 'supply_primary_and_secondary' |
'server_wins_options' | value= 'supply_primary_only' |

server_wins_secondary_address

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Valid when server_wins_options is supply_primary_and_secondary.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'server_wins_options' | value= 'supply_primary_and_secondary' |

ra_timeout

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Time to wait (in seconds) for Router Advertisment before NCP up. Valid only for port_role access.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

create_interfaces

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable echo request/reply. This command applies only for PPPv4 clients. Valid only for port_role access.

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

attempt_rate

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the rate in attempts/second at which attempts are made to bring up sessions. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the rate in attempts/second at which attempts are made to bring up sessions. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

100

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

attempt_max_outstanding

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

The number of triggered instances of an action that is still awaiting a response or completion

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

attempt_interval

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Time interval used to calculate the rate for triggering an action(rate = count/interval)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

attempt_enabled

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

attempt_scale_mode

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Indicates whether the control is specified per port or per device group. This setting is global for all the pppoxclient protocols configured in the ixncfg and can be configured just when handle is /globals (when the user wants to configure just the global settings)

Valid options are:

port

device_group

DEFAULT

port

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

disconnect_rate

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the rate in disconnects/s at which sessions are disconnected. This parameter can take values from the 1-1000 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the rate in disconnects/s at which sessions are disconnected. This parameter can take values from the 1-1000 range.

DEFAULT

100

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

disconnect_max_outstanding

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

The number of triggered instances of an action that is still awaiting a response or completion

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

disconnect_interval

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Time interval used to calculate the rate for triggering an action(rate = count/interval)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

disconnect_enabled

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Not defined

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

disconnect_scale_mode

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Indicates whether the control is specified per port or per device group. This setting is global for all the pppoxclient protocols configured in the ixncfg and can be configured just when handle is /globals (when the user wants to configure just the global settings)

Valid options are:

port

device_group

DEFAULT

port

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

enable_session_lifetime

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable session lifetime

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

min_lifetime

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Minimum session lifetime (in seconds)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

max_lifetime

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Maximum session lifetime (in seconds)

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

enable_session_lifetime_restart

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enable automatic session restart after stop at lifetime expiry

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

max_session_lifetime_restarts

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Maximum number of times each session is automatically restarted

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

unlimited_session_lifetime_restarts

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Allow each session to always be automatically restarted

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |

accept_any_auth_value

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Configures a PAP/CHAP authenticator to accept all offered usernames, passwords, and base domain names

DEFAULT

 None

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'network' |

port_handle

Supported platforms Details

IxNetwork [M]

DESCRIPTION

The port on which the PPPoX sessions is to be created.Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The port on which the PPPoX sessions is to be created. Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

protocol

Supported platforms Details

IxNetwork [M]

DESCRIPTION

Type of sessions to be configured. Valid options are:pppoapppoeoapppoeDependencies: -mode add (when IxNetwork is used for the PPPoX configuration).

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Type of sessions to be configured. Valid options are: pppoa pppoeoa pppoe Only the pppoe options is supported.

Valid options are:

pppoe

pppoeoa

pppoa

DEFAULT

pppoe

vci

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting VCI for PPPoA and PPPoEoA.

DEFAULT

 None

vci_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to VCI, PPPoA, and PPPoEoA only.

DEFAULT

 None

vci_count

Supported platforms Details

IxNetwork

DESCRIPTION

Number of VCIs.When using IxNetwork this parameter can take values from the 1-65504 range.

DEFAULT

 None

addr_count_per_vci

Supported platforms Details

IxNetwork

DESCRIPTION

VCI value. When this number is reached, an increment operation is initiated. This parameter is valid only when using IxTclNetwork API.Valid values: 1 - 65535.

DEFAULT

1

vpi

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting VPI for PPPoA and PPPoEoA.

DEFAULT

 None

vpi_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to VPI, PPPoA and PPPoEoA only.

DEFAULT

 None

vpi_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Number of VPIs.

DEFAULT

 None

addr_count_per_vpi

Supported platforms Details

IxNetwork

DESCRIPTION

VPI value. When this number is reached, an increment operation is initiated. This parameter is valid only when using IxTclNetwork API.Valid values: 1- 65535.

DEFAULT

1

pvc_incr_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

vpi - increment VPI first then VCI (all based on the info configured)vci - (DEFAULT) increment first VCI then VPIboth - increment both VPI and VCI at the same time

DEFAULT

 None

encap

Supported platforms Details

IxNetwork [M]

DESCRIPTION

Encapsulation type for session. Valid options are:ethernet_ii - Ethernet (valid for -protocol pppoe)ethernet_ii_vlan - Ethernet with VLAN (valid for -protocol pppoe)ethernet_ii_qinq - Ethernet with stacked VLAN (valid for -protocol pppoe)vc_mux - VC Mux Bridged Ethernet (FCS) (valid for -protocol pppoeoa)VC Mux PPP (valid for -protocol pppoa)vc_mux_routed - VC Mux IPv4/IPv6 Routed (valid for -protocol pppoa)vc_mux_nofcs - VC Mux Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)llcsnap - LLC Bridged Ethernet (FCS) (valid for -protocol pppoeoa)LLC Encap PPP (valid for -protocol pppoa)llcsnap_routed - LLC Routed AAL5 Snap (valid for -protocol pppoa)llcsnap_nofcs - LLC Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration) and -protocol.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Encapsulation type for session. Dependencies: -mode add (when IxNetwork is used for the PPPoX configuration) and -protocol.

Valid options are:

ethernet_ii

Ethernet (valid for -protocol pppoe)

ethernet_ii_vlan

Ethernet with VLAN (valid for -protocol pppoe)

ethernet_ii_qinq

Ethernet with stacked VLAN (valid for -protocol pppoe)

vc_mux

VC Mux Bridged Ethernet (FCS) (valid for -protocol pppoeoa)

vc_mux_routed

VC Mux IPv4/IPv6 Routed (valid for -protocol pppoa)

vc_mux_nofcs

VC Mux Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)

llcsnap

LLC Bridged Ethernet (FCS) (valid for -protocol pppoeoa)

llcsnap_routed

LLC Routed AAL5 Snap (valid for -protocol pppoa)

llcsnap_nofcs

LLC Bridged Ethernet (no FCS) (valid for -protocol pppoeoa)

DEFAULT

 None

address_per_vlan

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

How often a new outer VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

How often a new outer VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

address_per_svlan

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

How often a new inner VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

How often a new inner VLAN ID is generated. For example, a value of 10 will cause a new VLAN ID to be used in blocks of 10 IP addresses.

DEFAULT

1

qinq_incr_mode

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

inner - Increment the inner VLAN ID. Based on the vlan_id parameter first then increment the outer vlan_id_outer parameters next.outer - Increment the outer first then inner.both - (DEFAULT) Increment both inner and outer at the same time.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

inner

Increment the inner VLAN ID. Based on the vlan_id parameter first then increment the outer vlan_id_outer parameters next.

outer

Increment the outer first then inner.

both

(DEFAULT) Increment both inner and outer at the same time.

DEFAULT

both

vlan_id_outer

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting outer VLAN ID, applies to PPPoE w/Stacked VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting outer VLAN ID, applies to PPPoE w/Stacked VLAN only.

DEFAULT

1

vlan_id_outer_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Number of outer VLAN IDs, applies to PPPoE w/Stacked VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Number of outer VLAN IDs, applies to PPPoE w/Stacked VLAN only.

DEFAULT

4094

vlan_id_outer_step

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Step value applied to outer VLAN ID, PPPoEoE w/Stacked VLAN only.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Step value applied to outer VLAN ID, PPPoEoE w/Stacked VLAN only.

DEFAULT

1

vlan_user_priority_count

Supported platforms Details

password_wildcard

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables wildcard substituation in the password field.Notes: If mode is modify, all the wildcard parameters (password username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables wildcard substituation in the password field. Notes: If mode is modify, all the wildcard parameters (password username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

0

username_wildcard

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result.

DEFAULT

0

wildcard_pound_start

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting value for wildcard symbol 1 (\#) substitution. It is also valid to use # as the substitution symbol.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting value for wildcard symbol 1 (\) substitution. It is also valid to use as the substitution symbol. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

0

wildcard_pound_end

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Ending value for wildcard symbol 1 (\#) substitution. It is also valid to use # as the substitution symbol.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.It must be the same format as for wildcard_pound_start.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Ending value for wildcard symbol 1 (\) substitution. It is also valid to use as the substitution symbol. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002. It must be the same format as for wildcard_pound_start.

DEFAULT

0

wildcard_question_start

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Starting value for wildcard symbol 2 (?) substitution.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Starting value for wildcard symbol 2 (?) substitution. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.

DEFAULT

0

wildcard_question_end

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Ending value for wildcard symbol 2 (?) substitution.Enables wildcard substitution in the username field.Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002.It must be the same format as for wildcard_question_start.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Ending value for wildcard symbol 2 (?) substitution. Enables wildcard substitution in the username field. Notes: If mode is modify, all the wildcard parameters (username username_wildcard password_wildcard wildcard_pound_start wildcard_pound_end wildcard_question_start wildcard_question_end) must be reconfigured. Otherwise invalid configurations may result. This parameter can be provided in various formats. For example, the number 2 can be provided as follows: 2, 02, 002, 0002, 00002. It must be the same format as for wildcard_question_start.

DEFAULT

0

ac_select_list

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This option is used in case ac_select_mode is chosen as ac_mac or. ac_name. It specifies the AC MAC address and percentage pair as list:{00:11:00:00:00:11|50 00:11:00:00:00:12|50} or[list 00:11:00:00:00:11|50 00:11:00:00:00:12|50]or it specifies the ac name and percentage pair as list:{ciscoAC1|60 ciscoAC2|40} or [list ciscoAC1|60 ciscoAC2|40]

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

This option is used in case ac_select_mode is chosen as ac_mac or. ac_name. It specifies the AC MAC address and percentage pair as list: {00:11:00:00:00:11|50 00:11:00:00:00:12|50} or [list 00:11:00:00:00:11|50 00:11:00:00:00:12|50] or it specifies the ac name and percentage pair as list: {ciscoAC1|60 ciscoAC2|40} or [list ciscoAC1|60 ciscoAC2|40]

DEFAULT

 None

enable_throttling

Supported platforms Details

enable_setup_throttling

Supported platforms Details

enable_multicast

Supported platforms Details

local_magic

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

0 - Enable negotiaton of magic numbers.1 - (DEFAULT) Disable negotiation of magic numbers.

DEFAULT

 None

term_req_timeout

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the timeout value in seconds for acknowledgement of a Terminate Request.

DEFAULT

 None

lcp_max_failure

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Number of Configure-Nak packets received before abandon link setup

DEFAULT

 None

max_outstanding

Supported platforms Details

IxNetwork

DESCRIPTION

Specifies the maximum number of sessions in progress, which includes the sessions in the process of either coming up or disconnecting, at one time. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the maximum number of sessions in progress, which includes the sessions in the process of either coming up or disconnecting, at one time. When using IxNetwork this parameter can take values from the 1-1000 range.

DEFAULT

1000

dhcpv6_hosts_enable

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

0 - Configure standard PPPoE 1 - Enable using DHCPv6 hosts behind PPP CPE feature.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access' and -mode is 'create'. Configurations created with -dhcpv6_hosts_enable '0' cannot coexist on the same port with ranges created with -dhcpv6_hosts_enable 1.

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

Valid choices are: 0 ' Configure standard PPPoE 1 ' Enable using DHCPv6 hosts behind PPP CPE feature. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access' and 'mode is 'create'. Configurations created with 'dhcpv6_hosts_enable '0' cannot coexist on the same port with ranges created with 'dhcpv6_hosts_enable 1.

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'mode' | value= 'create' |

dhcp6_global_echo_ia_info

Supported platforms Details

IxNetwork

DESCRIPTION

If 1 the DHCPv6 client will request the exact address as advertised by the server. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

0

(DEFAULT) Disabled

1

Enabled

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

If 1 the DHCPv6 client will request the exact address as advertised by the server. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Valid choices are: 0 - (DEFAULT) Disabled 1 - Enabled

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_max_outstanding_releases

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_max_outstanding_requests

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

20

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

20

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_reb_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_reb_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial rebind timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_rel_max_rc

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 release attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

5

IxNetwork-NGPF

DESCRIPTION

RFC 3315 release attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

5

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_rel_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial release timeout in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial release timeout in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_ren_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

600

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

600

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_ren_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial renew timeout in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_req_max_rc

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max request retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max request retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_req_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

30

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

30

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_req_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial request timeout value in secons. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_setup_rate_initial

Supported platforms Details

IxNetwork

DESCRIPTION

Setup rate is the number of clients to start in each second. This value represents the initial value for setup rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Setup rate is the number of clients to start in each second. This value represents the initial value for setup rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_setup_rate_increment

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the increment value for setup rate. This value is applied every second and can be negative. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

dhcp6_global_setup_rate_max

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the final value for setup rate. The setup rate will not change after this value is reached. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

dhcp6_global_sol_max_rc

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max solicit retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

3

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max solicit retry attempts. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

3

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_sol_max_rt

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 max solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

120

IxNetwork-NGPF

DESCRIPTION

RFC 3315 max solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

120

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_sol_timeout

Supported platforms Details

IxNetwork

DESCRIPTION

RFC 3315 initial solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

4

IxNetwork-NGPF

DESCRIPTION

RFC 3315 initial solicit timeout value in seconds. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

4

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_teardown_rate_initial

Supported platforms Details

IxNetwork

DESCRIPTION

Setup rate is the number of clients to stop in each second. This value represents the initial value for teardown rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

50

IxNetwork-NGPF

DESCRIPTION

Setup rate is the number of clients to stop in each second. This value represents the initial value for teardown rate. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

50

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_global_teardown_rate_increment

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the increment value for teardown rate. This value is applied every second and can be negative. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

50

dhcp6_global_teardown_rate_max

Supported platforms Details

IxNetwork

DESCRIPTION

This value represents the final value for teardown rate. The teardown rate will not change after this value is reached. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

dhcp6_global_wait_for_completion

Supported platforms Details

IxNetwork

DESCRIPTION

This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

0

(DEFAULT) Disabled

1

Enabled

DEFAULT

0

dhcpv6pd_type

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

ppp_client - DHCPv6PDoPPPServerppp_server - DHCPv6PDoPPPClient

DEFAULT

client

IxNetwork-NGPF

DESCRIPTION

Not defined

Valid options are:

client

DHCPv6PDoPPPServer

server

DHCPv6PDoPPPClient

DEFAULT

client

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_duid_enterprise_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the vendor's registered Private Enterprise Number as maintained by IANA. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Define the vendor's registered Private Enterprise Number as maintained by IANA. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pd_client_range_duid_type' | value= 'duid_en' |

dhcp6_pd_client_range_duid_type

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the DHCP unique identifier type. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

duid_en

duid_en

duid_llt

(DEFAULT) duid_llt

duid_ll

duid_ll

DEFAULT

duid_llt

IxNetwork-NGPF

DESCRIPTION

Define the DHCP unique identifier type. Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

duid_en

duid_en

duid_llt

(DEFAULT) duid_llt

duid_ll

duid_ll

DEFAULT

duid_llt

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_duid_vendor_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the vendor-assigned unique ID for this range. This ID is incremented automatically for each DHCP client.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Define the vendor-assigned unique ID for this range. This ID is incremented automatically for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_duid_vendor_id_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the step to increment the vendor ID for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

Define the step to increment the vendor ID for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_duid_type is 'duid_en'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_ia_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the identity association unique ID for this range. This ID is incremented automatically for each DHCP client.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

Define the identity association unique ID for this range. This ID is incremented automatically for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is ' access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_ia_id_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the step used to increment dhcp6_pd_client_range_ia_id for each DHCP client.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

IxNetwork-NGPF

DESCRIPTION

Define the step used to increment dhcp6_pd_client_range_ia_id for each DHCP client. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

1

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_ia_t1

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the suggested time at which the client contacts the server from which the addresses were obtained to extend the lifetimes of the addresses assigned.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

302400

IxNetwork-NGPF

DESCRIPTION

Define the suggested time at which the client contacts the server from which the addresses were obtained to extend the lifetimes of the addresses assigned. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

302400

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_ia_t2

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the suggested time at which the client contacts any available server to extend the lifetimes of the addresses assigned.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

483840

IxNetwork-NGPF

DESCRIPTION

Define the suggested time at which the client contacts any available server to extend the lifetimes of the addresses assigned. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

483840

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_ia_type

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define Identity Association Type.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

iapd

IxNetwork-NGPF

DESCRIPTION

Define Identity Association Type. Valid choices are: IAPD, IANA, IATA, IANA_IAPD Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

Valid options are:

iapd

iana

iata

iana_iapd

DEFAULT

iapd

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_param_request_list

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Accepts list of values. Define the list of options in a message between a client and a server. (DEFAULT = {2 7 23 24})Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

{2 7 23 24}

dhcp6_pd_client_range_renew_timer

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Define the user-defined lease renewal timer. The value is estimated in seconds and will override the lease renewal timer if it is not zero and is smaller than the server-defined value.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

Define the user-defined lease renewal timer. The value is estimated in seconds and will override the lease renewal timer if it is not zero and is smaller than the server-defined value. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pd_client_range_use_vendor_class_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enable using vendor class id.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

Valid options are:

0

disable

1

enable

DEFAULT

0

dhcp6_pd_client_range_vendor_class_id

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This option is used by a client to identify the vendor that manufactured the hardware on which the client is running. (DEFAULT = 'Ixia DHCP Client')Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'; dhcp6_pd_client_range_use_vendor_class_id is 1

DEFAULT

"Ixia DHCP Client"

dhcp6_pd_server_range_dns_domain_search_list

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Specifies the domain that the client will use when resolving host names with DNS.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

Specifies the domain that the client will use when resolving host names with DNS.

DEFAULT

 None

dhcp6_pd_server_range_first_dns_server

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The first DNS server associated with this address pool. This is the first DNS address that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The first DNS server associated with this address pool. This is the first DNS address that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

dhcp6_pd_server_range_second_dns_server

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The second DNS server associated with this address pool. This is the second (of two) DNS addresses that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The second DNS server associated with this address pool. This is the second (of two) DNS addresses that will be assigned to any client that is allocated an IP address from this pool.

DEFAULT

 None

dhcp6_pd_server_range_subnet_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The prefix value used to subnet the addresses specified in the address pool. Thisis the subnet prefix length advertised in DHCPv6PD Offer and Reply messages.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The prefix value used to subnet the addresses specified in the address pool. This is the subnet prefix length advertised in DHCPv6PD Offer and Reply messages.

DEFAULT

 None

dhcp6_pd_server_range_start_pool_address

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The starting IPv6 address for this DHCPv6 address pool.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The starting IPv6 address for this DHCPv6 address pool.

DEFAULT

 None

dhcp6_pgdata_max_outstanding_requests

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

20

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session startup. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

20

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_setup_rate' | value= '1' |

dhcp6_pgdata_override_global_setup_rate

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pgdata_setup_rate_initial

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

10

IxNetwork-NGPF

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

10

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_setup_rate' | value= '1' |

dhcp6_pgdata_setup_rate_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'.

DEFAULT

0

dhcp6_pgdata_setup_rate_max

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_setup_rate is '1'

DEFAULT

10

dhcp6_pgdata_max_outstanding_releases

Supported platforms Details

IxNetwork

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

500

IxNetwork-NGPF

DESCRIPTION

The maximum number of requests to be sent by all DHCP clients during session teardown. This parameter applies globally for all the ports in the configuration. Available starting with HLT API 3.90 IxNetwork is used for PPPoX configurations. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

500

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_teardown_rate' | value= '1' |

dhcp6_pgdata_override_global_teardown_rate

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level.Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

0

IxNetwork-NGPF

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

0

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |

dhcp6_pgdata_teardown_rate_initial

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Description This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

50

IxNetwork-NGPF

DESCRIPTION

Description This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

50

DEPENDENCIES

Valid in combination with parameter(s)
'port_role' | value= 'access' |
'dhcpv6_hosts_enable' | value= '1' |
'ip_cp' | value= 'ipv6_cp' |
'ip_cp' | value= 'dual_stack' |
'dhcp6_pgdata_override_global_teardown_rate' | value= '1' |

dhcp6_pgdata_teardown_rate_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

50

dhcp6_pgdata_teardown_rate_max

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter refers to the DHCPv6 Client Port Group Data. This parameter applies at the port level. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter dhcp6_pgdata_override_global_teardown_rate is '1'

DEFAULT

500

hosts_range_ip_outer_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter represents the address prefix allocated to the hosts in all of the subnets behind the CPE interface. The default prefix is 64, the minimum is 0, and the maximum is 128.

DEFAULT

64

hosts_range_ip_prefix_addr

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The IPv6 prefix to be used for the static host addresses. The default prefix is 3001.

DEFAULT

 None

hosts_range_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Configures the DHCP Hosts Range count property. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

 None

hosts_range_eui_increment

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

This parameter configures the EUI step to increment 'hosts_range_first_eui ' from the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'. Parameter hosts_range_count greater than 1

DEFAULT

 None

hosts_range_first_eui

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Configures the first EUI value of the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

 None

hosts_range_ip_prefix

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Defines the network prefix length associated with the address pool for the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'

DEFAULT

 None

hosts_range_subnet_count

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

It defines the number of subnets for the DHCP Hosts Range. Dependencies: Available starting with HLT API 3.90. Valid when port_role is 'access'; dhcpv6_hosts_enable is 1; ip_cp is 'ipv6_cp' or 'dual_stack'.

DEFAULT

 None

lease_time_max

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The maximum lease duration, in seconds. The default value is 86,400; the minimum is 300; and the maximum is 30,000,000.

DEFAULT

 None

lease_time

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

The duration of an address lease, in seconds, if the client requesting the lease does not ask for a specific expiration time. The default value is 3600; the minimum is 300; and the maximum is 30,000,000.

DEFAULT

 None

IxNetwork-NGPF

DESCRIPTION

The duration of an address lease, in seconds, if the client requesting the lease does not ask for a specific expiration time. The default value is 3600; the minimum is 300; and the maximum is 30,000,000.

DEFAULT

3600

padi_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADI message.

DEFAULT

 None

pado_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADO message.

DEFAULT

 None

padr_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADR message.

DEFAULT

 None

pads_include_tag

Supported platforms Details

IxNetwork, IxOS/IxNetwork-FT

DESCRIPTION

Enables sending the Access Loop Tag in the PADS message.

DEFAULT

 None

re_connect_on_link_up

Supported platforms Details

group_ip_count

Supported platforms Details

group_ip_step

Supported platforms Details

start_group_ip

Supported platforms Details

igmp_version

Supported platforms Details

is_last_subport

Supported platforms Details

join_leaves_per_second

Supported platforms Details

l4_src_port

Supported platforms Details

l4_dst_port

Supported platforms Details

l4_flow_number

Supported platforms Details

l4_flow_type

Supported platforms Details

l4_flow_variant

Supported platforms Details

mc_enable_general_query

Supported platforms Details

mc_enable_group_specific_query

Supported platforms Details

mc_enable_immediate_response

Supported platforms Details

mc_enable_packing

Supported platforms Details

mc_enable_router_alert

Supported platforms Details

mc_enable_suppress_reports

Supported platforms Details

mc_enable_unsolicited

Supported platforms Details

mc_group_id

Supported platforms Details

mc_report_frequency

Supported platforms Details

ppp_local_mode

Supported platforms Details

ppp_peer_mode

Supported platforms Details

enable_delete_config

Supported platforms Details

flap_repeat_count

Supported platforms Details

flap_rate

Supported platforms Details

switch_duration

Supported platforms Details

watch_duration

Supported platforms Details

hold_time

Supported platforms Details

cool_off_time

Supported platforms Details

dut_assigned_src_addr

Supported platforms Details

include_id

Supported platforms Details

sessions_per_vc

Supported platforms Details

enable_host_uniq

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Enables PPPoE Host-Uniq tag

DEFAULT

 None

host_uniq

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

Host-Uniq

DEFAULT

 None

multiplier

Supported platforms Details

IxNetwork-NGPF

DESCRIPTION

number of layer instances per parent instance (multiplier)

DEFAULT

 None

RETURN VALUES

Supported Platform Details

IxNetwork-NGPF

pppox_client_handle

A list containing the pppox client protocol stack handles that were added by the command (if any).

pppox_server_handle

A list containing the pppox server protocol stack handles that were added by the command (if any).

pppox_server_sessions_handle

A list containing the pppox server sessions protocol stack handles that were added by the command (if any).

dhcpv6_client_handle

A list containing the dhcpv6 client protocol stack handles that were added by the command (if any).

dhcpv6_server_handle

A list containing the dhcpv6 server protocol stack handles that were added by the command (if any).

handle

A list containing individual interface, session and/or router handles that were added by the command (if any). Please note that this key will be omitted if the current session or command were run with -return_detailed_handles 0.

IxNetwork-NGPF and IxNetwork and IxOS/IxNetwork-FT

status

$::SUCCESS | $::FAILURE

handles

ppp handles

log

When status is failure, contains more information

EXAMPLES

IxNetwork and IxOS/IxNetwork-FT

See the PPPoE examples in Appendix A, "Example APIs," for specific examples of usage.

SAMPLE INPUT

SAMPLE OUTPUT

NOTES

IxNetwork-NGPF

1) Coded versus functional specification. 2) When -handle is provided with the /globals value the arguments that configure global protocol setting accept both multivalue handles and simple values. When -handle is provided with a a protocol stack handle or a protocol session handle, the arguments that configure global settings will only accept simple values. In this situation, these arguments will configure only the settings of the parent device group or the ports associated with the parent topology. If the current session or command was run with -return_detailed_handles 0 the following keys will be omitted from the command response: handle

IxNetwork and IxOS/IxNetwork-FT

1) Coded versus functional specification.